Legrand Keor SPE RT SINGLE-PHASE UPS Rack / Tower 750 to 3000 VA
The Legrand UPS Keor SPE RT is a line-interactive uninterruptible power source with pure sinewave output. The Keor SPE RT can be utilised as either tower and rack units, delivering a rated power from 750 upto 3000 VA. The Keor SPE RT is equipped, internally, with valve regulated, hermetically sealed lead accumulator batteries. The batteries can be easily replaced thanks to a specific door located on the front of the UPS. The presence of an electronic stabilizer (AVR) inside the UPS provides the connected loads with effective protection against any interference in the electrical mains Model SPE RT 1000 SPE RT 1500 SPE RT 2200 SPE RT 3000 SKU 311262 311264 311265 311267 General Features Nominal power (VA) 1000 1500 2200 3000 Active power (W) 800 1200 1980 2700 Power Factor 0.8 0.8 0.9 0.9 Rack Unit 2U 2U 2U 2U Technology Line Interactive VI Line Interactive VI Line Interactive VI Line Interactive VI Waveform Pure sinewave Pure sinewave Pure sinewave Pure sinewave Input Nominal voltage (V) 1Ph 1Ph 1Ph 1Ph Voltage range (V) Nominal 230 / Range: 175 - 288 @ full load Frequency (Hz) 47-63Hz (50/60Hz auto-sensing) Output Voltage (V) 230 v.adjustable to 200/208/220/230/240V Frequency (Hz) 50 or 60Hz +/- 0.5% 50 or 60Hz +/- 0.5% 50 or 60Hz +/- 0.5% 50 or 60Hz +/- 0.5% Batteries Battery Type Lead-acid sealed without maintenance (VRLA) Battery replacements Front Access (Hot-swappable) Battery Extension Yes (max 4pcs) Charging Time (0-90%) 6-7 hours Communication and Management Screen and signalling Five buttons, display and three coloured LED Bar for real-time control of the status of the UPS Communication RS232, USB, SNMP Slot, EPO, 2-dry contacts Protections Electronic circuits against overloads and short-circuit, back-feed, emergency power off (EPO), overtemperature Physical Characteristics Dimenions W x H x D (mm) 440 x 88 x440 440 x 88 x 440 440 x 88 x 600 440 x 88 x 600 Net weight (kg) 16.9 17.5 28.3 29.5 Environmental Conditions Operating temperature 0-40 °C 0-40 °C 0-40 °C 0-40 °C Relative humidity (%) 0 - 95% (non condensing) 0 - 95% (non condensing) 0 - 95% (non condensing) 0 - 95% (non condensing) Storage Temperature 0°C+ 50°C 0°C+ 50°C 0°C+ 50°C 0°C+ 50°C Protection Degree IP20 IP20 IP20 IP20 Acoustic Noise at 1m (dBA) <50 <50 <55 <55 Conformity Reference Product Standards IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3 Battery Cabinets Legrand References 3 110 75 3 110 75 3 110 76 3 110 77 Dimensions 440 x 86.5 x 440 440 x 86.5 x 440 440 x 86.5 x 440 440 x 86.5 x 440 Net Weight without batteries (kg) 22.2 22.2 18.1 22.2 Datasheet Datasheet Datasheet Datasheet Datasheet Installation Guide Installation Guide Installation Guide Installation Guide Installation Guide Manufacturers Warranty 3 Years 3 Years 3 Years 3 Years
Specifications
- Model
- SPE RT 2U 1000kVA, SPE RT 2U 1500kVA, SPE RT 2U 2200kVA, SPE RT 2U 3000kVA
- Extra External Battery Module
- UPS Only, Add Extra External Battery Module
Variants (8)
- SPE RT 2U 1000kVA / UPS Only — 488.00 GBP — In stock
- SPE RT 2U 1000kVA / Add Extra External Battery Module — 1020.80 GBP — In stock
- SPE RT 2U 1500kVA / UPS Only — 594.40 GBP — In stock
- SPE RT 2U 1500kVA / Add Extra External Battery Module — 1127.20 GBP — In stock
- SPE RT 2U 2200kVA / UPS Only — 848.00 GBP — In stock
- SPE RT 2U 2200kVA / Add Extra External Battery Module — 1451.20 GBP — In stock
- SPE RT 2U 3000kVA / UPS Only — 960.00 GBP — In stock
- SPE RT 2U 3000kVA / Add Extra External Battery Module — 1563.20 GBP — In stock
AI Readiness
Good foundation, but some important product data is still missing.