Cascade TEK SVO-10-VC Vacuum Oven 10.5 cu. ft. (297L) 220V

Cascade TEK SVO-10-VC Vacuum Oven 10.5 cu. ft. (297L) Manufacturer: Cascade TEK Model: SVO-10-VC Condition: New. Ships from manufacturer. Estimated lead time: Typically ships in 10-16 weeks from order and payment. Warranty: 2 year manufacturer's limited warranty. Features: Upgraded Pneumatic solenoid valves replace the manual operated valves in the standard system. A KF40 VAT valve is used to control the vacuum supply and a KF25 VAT valve is used to control the backfill gas. Additional Inficon Porter CDG020D Capacitance Diaphragm vacuum gauge. This gauge allows for the control of the vacuum level by setpoint. Recipes with vacuum setpoints (760 to 1Torr) can be written with the aid of this gauge. Upgraded Watlow F4T touchscreen display is enabled to control the vacuum system using vacuum setpoints. This configuration allows both the temperature and vacuum valve to be used in a profile using a chosen vacuum value down to 1 Torr. The Watlow F4T can hold 40 recipes with up to 50 steps each. Upgraded Vacuum path diameter to KF25 from pump to oven. This allows for faster pump down times and faster times to the ultimate pressure rating of your pump. This will also allow for lower base pressure. Upgraded PGE050 Full Range Digital Vacuum Gauge. The industrial gold standard for vacuum range and accuracy. The Inficon VGC will read from 1000 Torr to 0.1 mTorr. This gauge is great for determining the ultimate achievable pressure that your product can achieve as an indicator of dryness. Specifications: Internal Volume: 10.5 cubic foot. (297L) Interior Dimensions: 28.5” W x 24.5” H x 26” D Exterior Dimensions: 36.25” W x 62 H x 45” D Temperature Range: 10º C above ambient to 220ºC. Temperature Uniformity: +/- 6.0% of set point. Vacuum Valve: KF40 Pneumatic VAT™ vacuum valve to open & close vacuum line. (rear) Backfill Valve: KF25 Pneumatic VAT™ vent valve to open & close vent/purge/backfill line. (rear) Vacuum Gauge: Upgraded Inficon PGE050 digital full range vacuum gauge. This option allows the oven to display the vacuum level from 760 Torr to 0.1 mTorr. Vacuum Pump Connection:KF40 (rear) Backfill Vent Connections: KF25 (rear) Access Ports: KF25 Blank. For optional feed through (rear). Temperature Controls:Watlow F4T Touchscreen Programmable Microprocessor with Ramp & Soak Capabilities. Save up to 40 profiles with 50 steps each in controller memory. Additional profiles can be saved via Ethernet. Integrated over-temp controller. Communication: Standard communication is Ethernet Modbus® TCP with a RJ45 Connector. Optional: Modbus® RTU EIA-232/485 or EtherNet/IP™. *Now with Email/Text notifications*. USB for uploading profiles and saving data (optional) from the F4T (front panel). Vacuum Range: Tested to <10 mTorr. Heaters: 3872 watts. Power (oven only): 220-240V, 1ph, 50/60Hz, 30A, No cord/plug. Must be hardwired. Shelves: 3 adjustable (on .5” centers) aluminum shelves on pilaster strips. Door: Anodized Aluminum with Glass Viewing window. Door Gasket: Viton rated to 220C. Safety: Pressure Relief Valve in the event of over pressurization of vessel. Shipping Weight (uncrated): 1679 lbs. Warranty: 2 Year limited warranty. Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE Facilities: Air: 80 psi Shop Air required to open valves. ¼” OD. Hose push fitting quick connect. GN2/Inert Gas/Air: 3/8” OD Hose push fitting quick connect with High-flow regulator as close as possible to oven. ≤15psi. Power: 220V/230V / 1ph / 29AMP draw. 40 AMP service recommended. Junction box for hard wiring. No cord or plugs provided. Optional Platen will increase AMP draw. Roughing & Turbo Pump Exhaust: .5” ID heater hose flex line –connects to roughing pump exhaust. Turbo pump exhaust vents thru Roughing pump. ~4’ of hose exiting bottom rear of machine. LN2 (Optional): Optional Platen requires ~30 psi LN2 supply. MAX <50 psi supply. 1/2" JIC MALE (37° FLARE). An insulated (vacuum jacketed) supply line from LN2 supply is highly recommended.