LIFEPAK CR Plus Replacement Kit for Charge-Pak

Physio-Control LIFEPAK CR Plus / EXPRESS AED CHARGE-PAK Kit (Includes Pad & Battery) Product Overview The Physio-Control LIFEPAK CR Plus / EXPRESS CHARGE-PAK is an OEM replacement kit designed for use with the LIFEPAK CR Plus and LIFEPAK EXPRESS automated external defibrillators. This all-in-one kit replaces both the battery system and defibrillation electrode pad, which are designed by the manufacturer to be serviced and replaced together. The CHARGE-PAK system ensures the AED remains ready for emergency use by providing long-term standby power and preconnected electrode pads. What’s Included 1 × CHARGE-PAK lithium battery / charging unit 1 × set of adult defibrillation electrode pads Integrated discharger, used to safely deplete a spent CHARGE-PAK prior to disposal or recycling Important: The battery/discharger and electrode pads are supplied only as a combined kit and are not available separately. Both components must be replaced at the same time after use or upon expiration. Key Specifications Battery Type: Lithium (non-rechargeable) Standby Life: Up to 2 years Energy Output Capability: Approximately 166 shocks at 200 joules, or Approximately 103 shocks at 360 joules Estimated Operating Time: Up to 800 minutes Electrode Pad Replacement Interval: Every 2 years, or Immediately after patient use OEM Part Number: 11403-000002 Alternate / Cross-Reference Part Numbers: 3200727-002, 3200727-005, 3200731-002, 3200731-003, 3200731-009, 3201616-001, 3201616-003, 3202176, 3202176-003, 3202176-005, 3202176-006, 3202176-007, 3202176-008, 3202176-010, 11403-000001 Compatibility This CHARGE-PAK kit is only compatible with the following AED models: Physio-Control LIFEPAK CR Plus AED Physio-Control LIFEPAK EXPRESS AED These AED models have been discontinued by the manufacturer and are no longer available for new purchase. This CHARGE-PAK is intended for continued support of existing devices in service. Replacement Overview (General Guidance) Place the AED face up on a flat surface Locate the battery compartment at the lower portion of the unit Slide the existing CHARGE-PAK out Align the new CHARGE-PAK with the compartment rails Insert until fully seated and locked in place (Always follow manufacturer instructions and facility protocols when servicing AEDs.) Notes This listing is for the CHARGE-PAK kit only AED device not included Designed for emergency response readiness and regulatory compliance Replacement of battery and pads simultaneously is required by OEM design