ASI - 9018 Series Baby Changing Station, HORIZONTAL – STAINLESS STEEL, Recessed

ASI - 9018 Series Baby Changing Station, HORIZONTAL – STAINLESS STEEL, Recessed This horizontal station has a door facing and collar made from 18 gauge 304 stainless steel. Unit complies with 2010 ADA Accessibility Standards. Intended use for infants up to 3.5 years old and up to 50 lbs (23kg). Large Weight Capacity Our baby changing stations have been tested using ASTM F2285-04 and EN 12221-1 protocol for a static load and in addition have been tested to hold a weight up to 250 lbs [113kg]. Some Baby Changing Stations have been tested for holding a weight >250lbs. ADA Accessibility Standard Compliant Our units are engineered to comply with the standards set forth by the American Disabilities Act for accessibility and safety. Easy Open And Close Our units are designed for easy one-handed operation and shaped to safely cradle a child’s body. Features Horizontal baby changing station Recessed mounting Type 304 stainless steel door facing and collar Available in Satin Finish or Matte Black Powder Coated finish Unit complies with 2010 ADA Accessibility Standards Intended use for infants up to 3.5 years old and up to 50 lbs (23kg) Bed is designed to cradle a child’s body Adjustable two-part vinyl-coated safety strap with Sure-Lock latch Integral bag hook Bed-liner dispenser convertible to a multi-fold towel dispenser Damped gas spring aids one-handed operation using less than 5 lbs force (22.2N) Specifications Series 9018 Series Models 9018 / 9018-41 Type Baby Changing Station, HORIZONTAL – STAINLESS STEEL, Recessed Closed Dimensions 39-5⁄32″ x 28-1/4″ x 3⁄8″ (995 x 718 x 10 mm) Open Dimensions 39-5/32” x 28-1/4” x 18-1/8” (995 x 718 x 460 mm) Wall Opening 35-1/2″ x 24-1/2″ x 4″ min (902 x 622 x 102 mm) Construction Type 304 Stainless Steel Mounting Recessed 9018 Finish Satin Finish 9018-41 Finish Matte Black Powder Coated Intended Use Infants up to 3.5 years old and up to 50 lbs (23kg) Static Load Testing Tested during development to sustain 250 lbs (113 kg) static load with minimal deflection. Finishes 9018 – Type 304 Stainless Steel - Satin Finish 9018-41 – Type 304 Stainless Steel - Matte Black Powder Coated Safety & Accessibility Complies with 2010 ADA Accessibility Standards ASTM F-2285 & F-2388 compliant G-21 and G-22 compliant ANSI Z535 compliant ANSI 117.1 compliant EN 12221-1 and EN 12221-2 compliant Adjustable two-part vinyl-coated safety strap with Sure-Lock latch Operable using less than 5 lbs force (22.2N) Operation & Maintenance Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use. Unit is operable with less than 5 Lbf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners. Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent. Liners/towels are easily replenished by service personnel as required. Installation Unit is recess mounted using hardware supplied through concealed mounting holes. The supplied hardware kit contains fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained. Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading. Mounting hole plug covers are supplied to conceal fasteners after installation. Provide Rough Wall Opening (RWO) of required depth from face of finished wall. Mount unit in properly framed RWO using four (4) #10 x 1-1/2″ [M5 x 38] self-threading pan head screws through side holes. Alternate rear-hole mounting may be used where wall depth and framing reinforcement permits, using suitable fasteners appropriate for wall conditions. Rough Wall Opening (RWO) required is 35-1/2″ W x 24-1/2″ H x 4″ D minimum [902 x 622 x 102]. Downloads Product Care & Maintenance Installation, Maintenance & Operation Owner's Manual – 9018 Series Technical Data Sheet – 9018 – Satin Finish Technical Data Sheet – 9018-41 – Matte Black