ARCCAPTAIN TIG200P AC/DC 200A Aluminum TIG Welder Kit

TIG200P AC/DC Aluminum Welding Kit Bundle Summary In addition to the welder’s standard accessories, this kit includes a 71-piece TIG torch parts kit, a foot pedal, and one 5 lb package of aluminum TIG filler rods for compatible aluminum work. Bundle Highlights 01 Built for Aluminum TIG Work Includes aluminum TIG filler rods to support compatible AC TIG fabrication and repair applications. 02 Expanded Torch Consumables The 71-piece parts kit adds compatible consumables for maintaining and reconfiguring the included WP-26 torch. 03 Hands-Free Current Control Use the included foot pedal for convenient TIG amperage adjustment while keeping both hands on the work. 04 More in One Purchase Add aluminum-focused filler metal, torch consumables, and pedal control without sourcing each item separately. Extra Accessories Included in This Kit Everything below is included in addition to the standard accessories supplied with the welder. TIG Amperage-Control Foot Pedal ×1 Pedal Control Hands-Free Heat Control. Adjust current by foot while keeping both hands positioned for steady torch and filler-rod control. Compatibility: Designed for the ARCCAPTAIN TIG200P AC/DC foot-pedal connection. 71-Piece TIG Torch Parts Kit ×1 Torch Consumables Replacement Parts Within Reach. Keep compatible TIG torch wear parts available to reduce interruptions during maintenance and setup changes. Compatibility: Compatible with the included WP-26 torch; select each part to match the tungsten and cup configuration. 5 lb Aluminum TIG Filler Rods ×1 Aluminum Filler Metal Filler Metal for Aluminum. Adds aluminum TIG filler metal for compatible fabrication and repair work while reducing a separate purchase. Use Condition: Confirm the filler alloy and diameter match the base metal, joint design, and service requirements before welding. Best-Fit Applications Aluminum brackets, frames, and shop-fabricated parts where AC TIG and pedal control support heat management. Automotive and equipment repairs where the included filler metal is compatible with the base aluminum. Repeated aluminum TIG work that benefits from a 5 lb filler supply and spare torch components. Thin or heat-sensitive aluminum work where pulse settings and pedal control help manage heat input. General steel, stainless-steel, or copper TIG work when compatible filler metal is purchased separately. How to Use the Kit 1 Match the welding process and tungsten to the base material. Use the included aluminum filler rods only with compatible base aluminum; obtain the correct filler metal separately for other metals. 2 Connect the welder, WP-26 torch, ground clamp, gas system, and a filled 100% argon cylinder according to the product manual. 3 With input power disconnected, attach the compatible foot pedal as directed in the manual. Restore power, then select AC TIG or DC TIG for the applicable material. 4 Prepare the tungsten correctly, set gas flow and welding parameters, and test the settings on matching scrap material. 5 Use the pedal for current control and install parts from the 71-piece kit only when they match the torch setup. 6 Wear welding gloves, a properly rated welding helmet, protective clothing, and all other task-appropriate PPE. What You Still Need A filled shielding-gas cylinder, suitable electrical supply, properly matched tungsten, and task-appropriate PPE are required. Welding gloves and a welding helmet are not included in this kit unless separately stated in the product offer.