MILWAUKEE PAD PRO CUT LEVEL D GLOVES Work Gloves - 18 Gauge

Milwaukee PAD PRO Cut Level D 18-Gauge Work Gloves Protect your hands during general handling tasks without sacrificing dexterity. These 18-gauge gloves combine Cut Level D protection with TPR knuckle padding and a foam-padded palm for extra comfort when working with vibrating tools. A nitrile thumb-index patch reinforces a high-use area, while SMARTSWIPE™ on the index finger lets you use touchscreens without removing your gloves. Key Features Cut Level D: Designed to help protect against cuts during general handling work. 18-gauge construction: Supports dexterity and finger sensitivity. TPR knuckle padding: Adds protection across the knuckles. Foam palm padding: Provides extra comfort when working with vibrating tools. Nitrile thumb-index patch: Reinforces a high-use area. SMARTSWIPE™ index finger: Allows touchscreen use while wearing the gloves. Certification Rated EN ISO 21420, EN 388:2016 (4X42D) and EN 407 (X1XXXX); UKCA is also listed. EN ISO 21420: Covers general requirements for protective gloves, including fit, comfort and harmlessness; it does not assign a protection level. EN 388:2016 abrasion resistance (4): Rated 4 on a scale of 1–4, the highest abrasion-resistance level. EN 388:2016 blade cut resistance (X): No rating is reported for the circular-blade cut test, which uses a scale of 1–5. EN 388:2016 tear resistance (4): Rated 4 on a scale of 1–4, the highest tear-resistance level. EN 388:2016 puncture resistance (2): Rated 2 on a scale of 1–4. EN 388:2016 ISO 13997 cut resistance (D): Rated D on a scale from A–F for straight-blade cut resistance. EN 407 limited flame spread (X): No rating is reported on the 0–4 scale. EN 407 contact heat (1): Rated 1 on the 0–4 scale, corresponding to a contact-heat test at 100°C; this does not mean the gloves are suitable for handling hot objects. EN 407 remaining heat tests (XXXX): No ratings are reported for convective heat, radiant heat, small splashes of molten metal or large quantities of molten metal. UKCA: The product is listed with UKCA marking, indicating conformity with applicable UK product requirements. Specifications Table Product type Cut-resistant work gloves; anti-vibration gloves Cut level D Gauge 18 stitches per inch Material and construction Nitrile thumb-index patch, TPR knuckle padding and foam palm padding; base fabric not specified Lined No Abrasion resistant Yes Cut resistant Yes Finger sensitive Yes Anti-slip No Breathable No Cold resistant No Fat repellent No Colour Grey Available sizes S, M, L, XL, XXL Quantity 1 product per package Country of origin China Listed standards and marking EN ISO 21420; EN 388:2016 (4X42D); EN 407 (X1XXXX); UKCA Instructions and Care Do not wear gloves near rotating machine parts, such as saw blades or drills, due to the risk of entanglement. If the tear level is ≥ 1, do not use near moving machinery due to the risk of entanglement. The product is designed to minimise risks and provide protection against general handling risks. It does not protect against chemicals, handling hot or cold objects, or very sharp objects striking the hands with great force or speed. Store in the original packaging in clean, covered and ventilated premises under normal temperature and humidity conditions. Storage temperature: -5°C to 35°C. Storage humidity: 20%–75%. Gloves can be used out of the packaging for 5 years after the production date printed on the glove. Service life depends on wear and abrasion.