Glass Connector Adapters 10/14 – 10mm Female to 14mm Male, Pack of 2 or 4

Join a 10mm male piece to a 14mm female piece A straight glass adapter with a 10mm female socket at one end and a 14mm male joint at the other. Use it to connect a water pipe adapter (WPA), stem or other glass piece with a 10mm male joint to a bubbler or water tool with a 14mm female joint. 10mm female to 14mm male: your 10mm male piece sits in the adapter, and the adapter's 14mm male end goes into the 14mm female piece Straight glass design with a frosted 14mm male joint Sold in packs of 2 or 4, so you have spares For standard 10mm and 14mm glass joints Easy to clean with isopropyl alcohol and warm water Check before you order: This adapter only works one way: 10mm female in, 14mm male out. Check that the piece you're connecting has a 10mm male joint (frosted on the outside) and that the piece it goes into has a 14mm female joint (a socket). It won't turn a male joint into a female one, and it won't fit other joint sizes. For 14mm female to 18mm male, see our Glass Connector Adapters 14/18. Looking for a bubbler with a 14mm female joint? Try our Multi-Device Water Filtration Bubbler. Specifications Joint sizes 10mm female / 14mm male Shape Straight Material Glass Pack size 2 or 4 adapters Brand The Vapetrix How to Use Make sure every piece is cool, clean and dry. Gently push the adapter's 14mm male end into your 14mm female bubbler or water tool, then set your 10mm male WPA or stem into the adapter's 10mm socket. Never force a joint. Frequently Asked Questions What does a 10/14 adapter do? It joins a 10mm male glass joint to a 14mm female glass joint, for example a 10mm WPA going into a bubbler or water tool with a 14mm female joint. Which end is male and which is female? The 10mm end is female: a socket that a 10mm male joint pushes into. The 14mm end is male: the frosted outside that goes into a 14mm female joint. Can it go from 14mm down to 10mm? No. It only takes a 10mm male piece into a 14mm female piece. It can't connect a 14mm male piece to a 10mm female piece. How do I check my joint size? A male joint is frosted on the outside; a female joint is a socket. If the listing for your WPA or water tool gives the joint size, go by that. Otherwise measure across the joint: it will be close to 10mm, 14mm or 18mm. How do I clean it? Soak it in isopropyl alcohol, rinse it with warm water and let it dry fully before use. Check your joint sizes, then connect your setup.