Carpet Clean + Dry Pack: Cleanstar Cutlass 30L Extractor with 2× XPOWER X-47ATR Air Movers

One order covers both halves of a carpet job. The Cleanstar Cutlass 30L extracts soil and moisture, and two XPOWER X-47ATR air movers dry the carpet afterwards. The extractor and air movers ship together in one consignment. Pack price: $4,549 inc GST. Bought separately, the same items total $4,657. Extract and dry commercial carpet with one order 1,500W two-stage motor with 3,000mm water lift pulls more moisture out of the carpet on each pass, so there is less water left for the air movers to dry. 130 PSI bypass membrane pump (9 bar maximum) drives cleaning solution into dense commercial pile, so embedded contamination lifts instead of staying behind. 30-litre solution and recovery tanks cover a full room or several smaller areas before a refill, so there are fewer interruptions during a shift. 10-metre power cable with 5-metre hoses give a working range that covers most commercial rooms, so the machine is repositioned less often. 2800 CFM airflow from each X-47ATR moves a large volume of air across the floor, so damp carpet dries sooner than it would on its own. Variable speed control and a built-in 3-hour timer on the air movers let you set the airflow and leave the unit running, so you can move on to the next area while the carpet dries. On-board daisy-chain on the air movers runs both from a single power outlet, so setup needs fewer power points. What is in the pack Cleanstar Cutlass 30L Carpet Extraction Machine, with a three-nozzle carpet wand (300mm cleaning width), 4-inch plastic upholstery tool, 5-metre GVAC dirty water hose, 5-metre solution hose and 10-metre power cable 2 × XPOWER X-47ATR 225 Watt Turbo-Pro Axial Air Movers Specifications for both machines Cleanstar Cutlass 30L Motor: 1,500W, 2-stage | Max water lift: 3,000mm H₂O | Max airflow: 50 L/s Pump: bypass membrane, 80W, 9 bar (130 PSI) maximum | Max flow rate: 4.5 L/min Solution tank: 30L | Recovery tank: 30L (high-density polyethylene) Weight: 24kg | Dimensions (W × L × H): 38 × 50 × 78cm XPOWER X-47ATR (each) Motor: 1/3 HP | Power: 225 Watt, 1.0 Amp Rated airflow: 2800 CFM Weight: 11.3 kg | Size: 56 × 25 × 57 cm (L × W × H) Warranty: 12 month limited warranty The full pack weighs about 46.6kg (24kg extractor plus two 11.3kg air movers). Shipping is calculated at checkout from your delivery address. Questions about this pack Can this pack be used for water damage as well as carpet cleaning? Yes. The Cutlass's high water lift and airflow suit moisture extraction from water-affected carpet, and the X-47ATR air movers are suited to water damage restoration, carpet and floor drying, and ventilation of confined spaces. How many air movers do I need for a job? It depends on the carpet area and how wet it is. Send us the size of the area and we will advise how many units suit it. Additional XPOWER X-47ATR air movers can be added to your order. Does the Cutlass heat the water? The Cutlass specifications do not list a heater. If you need heated extraction, see the carpet and upholstery cleaning machines range or call us on 1300 404 226. Can I buy the extractor and air movers separately? Yes. Both are sold individually: the Cleanstar Cutlass 30L and the XPOWER X-47ATR. Which machine suits high-volume daily carpet cleaning? The Cutlass is built for commercial extraction across rooms and offices. For carpet cleaning businesses running an extractor across full daily shifts, call us on 1300 404 226 and we will help match the machine to your workload. What warranty applies? Each XPOWER X-47ATR carries a 12 month limited warranty. For Cutlass warranty terms, call us on 1300 404 226. Is finance available? Finance through Emu Money is available on purchases over $2,000, which includes this pack.