Conderenergy 12kW 48V Hybrid Solar Inverter – Dual MPPT

Conder Energy 12kW 48V Hybrid Inverter The Conder Energy 12kW Hybrid Inverter provides a high-capacity solar and backup-power solution for properties with larger electrical loads. With 12,000W continuous output, a 48V battery platform and pure sine wave AC output, the inverter is designed to intelligently combine solar panels, lithium battery storage and grid electricity. Current South African listings identify it as a single-phase hybrid inverter suitable for both on-grid and off-grid operation. Solar-strength Dual MPPT technology allows separate solar arrays to be managed efficiently, while the wide 90V–450V MPPT operating range provides flexibility when designing compatible PV strings. Lekkervolt Key Features 12kW / 12kVA rated output Single-phase inverter 48V DC battery system Compatible with appropriately configured 48V / 51.2V lithium batteries Hybrid on-grid and off-grid operation Pure sine wave AC output Dual MPPT solar inputs Maximum PV input voltage: 500V DC MPPT operating range: 90V–450V DC Approximately 160A maximum solar charging current 220V / 230V / 240V AC output 50Hz / 60Hz operation Maximum efficiency: up to 97% Smart LCD display Smart battery charging Solar Priority mode Utility Priority mode Battery Priority mode Smart fan cooling Overload protection Short-circuit protection Over-temperature protection Remote monitoring support, depending on configuration Parallel capability is model dependent Lekkervolt Technical Specifications Brand: Conder Energy Product Type: Hybrid Solar Inverter Rated Power: 12kW / 12kVA Phase: Single Phase Battery Voltage: 48V DC Output Waveform: Pure Sine Wave Operating Type: Hybrid On-Grid + Off-Grid Solar Input MPPT: Dual MPPT Maximum PV Input Voltage: 500V DC MPPT Voltage Range: 90V–450V DC Maximum Solar Charging Current: Approximately 160A Lekkervolt AC Output Rated Output: 12,000W / 12kVA AC Output Voltage: 220V / 230V / 240V Frequency: 50Hz / 60Hz Maximum Efficiency: Up to 97% Lekkervolt Cooling & Protection Cooling: Smart fan cooling Overload Protection: Yes Short-Circuit Protection: Yes Over-Temperature Protection: Yes Display: Smart LCD display Lekkervolt Dual MPPT Solar Input The Conder Energy 12kW inverter features two MPPT solar charge controllers, allowing solar arrays to be divided across separate MPPT inputs. With a maximum PV input voltage of 500V DC and an MPPT operating range of 90V–450V DC, the inverter provides good flexibility when designing larger solar-panel arrays. Lekkervolt Correct string sizing remains essential to ensure panel open-circuit voltage and operating voltage remain within the inverter’s permitted limits. 48V Lithium Battery Compatibility The inverter operates from a 48V DC battery platform, making it suitable for appropriately configured 48V and 51.2V lithium battery systems. Lekkervolt Battery capacity should be selected according to the required backup period and expected loads. For a 12kW inverter installation, particular attention should be given to battery discharge capability. A battery bank that cannot supply sufficient current may restrict the amount of power that the inverter can deliver during battery operation. Battery BMS communication and supported communication protocols should be confirmed against the exact Conder Energy inverter model before installation. Intelligent Power Priority Modes The inverter supports multiple power-management modes, including: Solar Priority – prioritises available solar generation. Utility Priority – gives grid electricity priority according to the selected settings. Battery Priority – allows stored battery energy to be prioritised according to the inverter configuration. Lekkervolt These operating options allow the system to be configured for backup power, improved solar self-consumption or reduced grid usage. Pure Sine Wave Output The Conder Energy 12kW inverter provides pure sine wave AC output, making it suitable for a wide range of household and business electrical equipment when the installation is correctly designed. Lekkervolt Its 12kW capacity makes it suitable for properties with substantially higher combined loads than conventional 3kW, 5kW or 8kW inverter systems. Ideal Applications The Conder Energy 12kW is an excellent option for: Large residential solar installations High-demand homes Home backup systems Small businesses Offices Shops Farms Workshops Guest houses and lodges Hybrid solar systems Off-grid solar installations Load-shedding backup 48V lithium battery systems What’s Included 1 × Conder Energy 12kW 48V Hybrid Solar Inverter Manufacturer-supplied accessories where applicable User documentation where supplied Wi-Fi dongle, batteries, solar panels, DB protection, battery cables, PV cables and installation are not included unless specifically stated in the quotation or package.