Koch Chemie Ceramic Neo C0.03 30ml

Koch Chemie Ceramic Neo C0.03 30ml: Premium Ceramic Coating for Long-Lasting Paint Protection: Give your vehicle’s paintwork an exceptional level of protection, gloss and hydrophobic performance with Koch-Chemie Ceramic Neo C0.03. Developed for painted exterior vehicle surfaces, this advanced ceramic coating forms a durable protective layer that enhances colour depth while delivering an intense, high-gloss finish. Ceramic Neo provides strong water repellency, excellent surface smoothness and an easy-to-clean effect. Once fully cured, the coating helps protect the paintwork against environmental influences such as UV radiation, road salt, bird droppings and fallout, while reducing the adhesion of dirt and contamination. Features: Premium ceramic coating for painted exterior vehicle surfaces Provides long-lasting protection against environmental contamination Creates an extremely hydrophobic, water-repellent surface Enhances colour depth and produces an intense deep gloss Leaves the paintwork noticeably smoother to the touch Provides an easy-to-clean effect for easier maintenance Helps protect against UV radiation, road salt, bird droppings and fallout Provides high chemical resistance once fully cured Suitable for professional detailers, valeters and enthusiasts Provides protection for up to approximately 36 months, depending on use and maintenance Areas of Use: Painted exterior vehicle surfaces Automotive paintwork Professionally prepared bodywork Exterior painted panels Recommendations for Use: Thoroughly clean and prepare the vehicle before application. Remove all dirt, tar, tree sap, iron fallout and other contamination. Where required, polish the paintwork to remove defects and achieve a clean, smooth finish. Remove all polishing residues and thoroughly degrease the surface before coating. The paintwork must be completely clean, dry and free from waxes, oils, polishing residues and other contaminants. Apply Ceramic Neo panel by panel using a suitable application sponge. Work the coating into the paint in two cross-hatch passes until a thin, continuous film is visible. Allow the product to flash off before removing the excess with a suitable coating towel. Finish with a fresh side of the towel using light, circular movements and no pressure. Check the surface under suitable lighting to ensure it is free from streaks or high spots. At approximately 20°C and 43% relative humidity, the typical flash-off time is around 8 minutes, although this can vary depending on temperature and humidity. The coating becomes weather-resistant after approximately 18–24 hours and reaches full chemical resistance after around 9 days. Avoid washing the vehicle during the curing period and remove bird droppings or similar contamination promptly and carefully. A second coat may be applied approximately 25 minutes after the first to further optimise protection. A third coat is not recommended. Warnings: Do not apply to hot surfaces. Use gloves and apply only to thoroughly cleaned surfaces in a protected environment away from environmental contamination. Size: 30ml Product Code: KC-699-S30-01.