Winpact WP-COS CO2-Resistant Orbital Shaker

MAJOR SCIENCE · WINPACT · WP-COS Add orbital motion to your incubator workflow The Winpact WP-COS is an orbital shaker designed for use inside a suitable CO2 incubator. It is not an incubator and does not provide its own temperature, humidity or CO2 control. Major Science specifies corrosion-resistant construction to help protect internal components in high-CO2, humid conditions. A brushless motor drives a 20 mm orbit across the 300 x 300 mm platform. The separate 12-inch color touch controller provides speed adjustment and continuous, timed or programmable operation, allowing you to select the run style that fits your protocol. Manufacturer WP-COS photograph. The flask, liquid and blue sticky pad illustrate a setup and are not the stated flat-mat package. Display settings are examples. 1 to 300 rpm Shaking speed 20 mm Orbital diameter 300 x 300 mm Platform 5.2 kg Maximum load Why laboratories choose this format Incubator-based mixing Add a purpose-designed orbital shaker to a suitable host CO₂ incubator, instead of assuming an ordinary bench shaker is suitable. Separate touch control Use the 12-inch panel for continuous, timed or programmable operation. Agree controller placement and cable routing for the site. Defined mixing format A brushless motor, 20 mm orbit and 300 × 300 mm platform provide clear parameters for a fit and load review. Which Winpact shaking format do I need? SI-910 Refrigerated, non-CO₂ format 25 mm orbit; 10–300 rpm; 4–60°C at 23–25°C ambient. No CO₂ or humidity control specified. SI-960 Refrigerated CO₂ format 50 mm orbit; 10–180 rpm; 4–60°C at 23–25°C ambient. 0.1–20% CO₂; 50–95% RH; HEPA optional. WP-COS · Current model Shaker for an existing incubator 20 mm orbit; 1–300 rpm; 300 × 300 mm platform. Requires a suitable host incubator for environmental control. These are different instrument formats, not interchangeable configurations or upgrade promises. Select the complete system around the conditions your protocol requires. Check the chamber before choosing the shaker The base measures approximately 310 x 310 x 97 mm including the tray platform. Use these dimensions as the starting point for a fit check, then account for vessel height, holders, orbital movement, ventilation and cable routing. The published base dimensions are not a minimum incubator chamber specification. Confirm the incubator shelf loading limit against the base mass of approximately 7.15 kg plus the planned load. The controller measures 320 x 102 x 246 mm and weighs approximately 4.65 kg. Controller placement, cable access and required clearances should be agreed for the installation. Manufacturer alternate view. Base dimensions do not include the clearance needed for your vessels, holders, movement and cable. Manufacturer interface illustration. Values shown are examples, not a published maximum timer range or program-step count. Select speed and run mode at the touch panel The 12-inch color touch panel supports continuous, timed and programmable modes. Shaking speed is adjustable from 1 to 300 rpm in 1 rpm steps, and the specification also lists a 0 rpm setting. For protocols that depend on a particular timing range, sequence length or saved-program workflow, confirm those details before purchase. The public specification does not define program-step limits, stored recipe capacity or the full timer range. Match vessel retention to your experiment The 300 x 300 mm platform has a 316L top plate. Major Science lists strip springs, a 200 x 200 mm sticky pad, 300 x 300 mm dimpled and flat mats, and flask holders in nominal sizes from 50 to 2000 mL as accessories for this model. Choose retention accessories around the actual vessel geometry, working load and intended speed. Holder size is not a claim about how many vessels fit on the platform or how much culture volume the shaker can process. Confirm the accessory arrangement rather than using photographs as a packing list. Manufacturer accessory overview. The flat-mat platform is in the listed configuration; sticky pad, dimpled mat, springs and holders are separate selections. Confirm the environmental operating envelope The WP-COS is specifically described as a CO2-resistant orbital shaker for incubator use. The reviewed public manufacturer materials do not state numerical temperature, relative-humidity or CO2 concentration limits for this model. Provide the proposed incubator model and operating conditions when confirming suitability. Cable length, feed-through compatibility, controller placement and any cleaning or decontamination requirements also need to be checked. Do not assume compatibility with every incubator or its sterilization cycle. Specify the complete configuration The listed WP-COS configuration combines the orbital shaker, 12-inch color touch controller and flat-mat platform. A blue sticky pad is a different retention option, not the stated flat-mat configuration. Confirm the supplied cable and its length, the final platform assembly and any additional vessel-retention accessories when defining the order. An incubator, glassware, blue sticky pad and pictured flask holders are not part of that stated configuration. Optional sticky pad PPL-04-SI-SI-200-3, 200 × 200 mm. This is not the flat-mat platform stated in the WP-COS ordering configuration. A practical incubator fit check 1 · Space and access Start with the approximately 310 × 310 × 97 mm base envelope, then add your vessel height, retaining hardware, motion clearance and access. 2 · Shelf and load Check the host shelf rating for the approximately 7.15 kg base plus the planned load. The shaker maximum load is 5.2 kg. 3 · Conditions and cable Confirm temperature, humidity, CO₂ conditions, cable reach and routing. Published base size does not establish a universal incubator fit. Planning tip: A nominal 2000 mL holder size does not establish platform vessel count, culture working volume or compatibility with a particular incubator.See the WP-COS manufacturer demonstration Exact-model manufacturer demonstration. Any labware and optional retention accessories shown are illustrative. No additional timer, programming or environmental limits are inferred from the display.Other laboratory workflows Alternative format MS-NOR-3001 anti-moisture orbital shakerA different orbital format for a separately defined bench or chamber workflow. Review its lower published speed range and different load rating; it is not an integrated incubator or a like-for-like replacement. Related workflow MU-D01 digital peristaltic pumpExplore a separate liquid-transfer step. Tubing and flow requirements are selected independently; no mechanical, electrical or automated integration with this shaker is implied. WP-COS buyer questions Is the WP-COS an incubator?No. It is an orbital shaker intended for use inside a suitable CO2 incubator. The incubator supplies the controlled environment; the WP-COS supplies the shaking motion.Will it fit my CO2 incubator?Fit must be checked for your chamber. The base is approximately 310 x 310 x 97 mm including the tray platform. Allow additional space for vessels, holders, orbital movement and cable routing, and check the shelf load limit against the approximately 7.15 kg base plus the planned load.What speeds and orbit does it provide?The WP-COS provides a 20 mm orbital diameter and shaking speeds from 1 to 300 rpm in 1 rpm steps. The manufacturer also lists a 0 rpm setting. Its published maximum load is 5.2 kg.Does it support timed or programmed operation?Yes. Continuous, timed and programmable modes are specified through the 12-inch color touch panel. The public specification does not confirm timer limits, program-step counts or stored-program capacity.What comes with the WP-COS?The listed WP-COS configuration includes the orbital shaker with a 12-inch color touch controller and flat-mat platform. Confirm the supplied cable and its length and any additional retention accessories on your quotation. The incubator, glassware, blue sticky pad and pictured holders are not established as included.Which vessel accessories are available?Listed options include 265 mm strip springs, a 200 x 200 mm sticky pad, 300 x 300 mm dimpled and flat mats, and flask holders sized from 50 to 2000 mL. Confirm fit for your specific vessels and intended speed. The listing does not establish vessel counts or total culture volume.What temperature, humidity and CO2 levels can it withstand?Numerical limits are not stated in the reviewed public manufacturer specifications. The manufacturer describes corrosion-resistant construction for high-CO2, humid conditions, but suitability for your operating conditions and any incubator decontamination cycle needs confirmation.Is it the same product as the MS-NOR-3001 anti-moisture shaker?No. The WP-COS is a separate Winpact model with a brushless motor, 12-inch touch controller and a stated 1 to 300 rpm shaking range. MS-NOR-3001 belongs to the MS orbital shaker range. Do not transfer package contents, capacities or environmental limits between these models.