Procella Audio - DA03-DSP - Amplifier

The DA03-DSP is a high output power amplifier and has the horsepower to bring out every little detail of Procella’s high-output speakers and subwoofer models. Procella’s DA03-DSP can be used as a four-channel amplifier to produce 4x 280W (8 ohms) and 4x 500W (4 ohms), but switch to bridge mode, and it will deliver 2x 1.050W (8 ohms). In a single rack unit, this power station ensures maximum output and dynamic range, especially for Procella loudspeakers. 40 factory presets enable multiple configurations with Procella’s high output speakers and subwoofers. Specification Details Output Power @ 4Ω / 8Ω 4 × 280W / 4 × 500W, bridged 2 × 1,050W at 8Ω Max. Output Current 25A peak Signal-to-Noise Ratio >104 dB A-weighted, 20 Hz – 20 kHz, 8 Ω THD+N (Typical) <1% (1 kHz continuous sine wave, all channels driving) Frequency Response 20 Hz – 20 kHz (+0 / -0.5 dB, 8 Ω load, 3 dB below rated power) Protection Circuits Short circuit protection, DC protection, limiter, under-voltage protection, over-temperature protection, overload protection Operating Voltage / Frequency Universal mains, 90–260V, 50–60Hz DSP for All Channels 40 selectable presets, level, parametric EQ, delay, matrix limiter Carton Content Mains power cable, 4 × adhesive rubber feet, user guide Dimensions & Net Weight 483 × 45 × 370 mm (1U) / 19” × 1.7” × 14.6”, 9.0 kg / 19.8 lbs Shipping Carton & Weight 570 × 135 × 515 mm / 22.44” × 5.31” × 20.28”, 10 kg / 22.05 lbs