304 Stainless Steel Bearings Balls High-Precision Solid Metal Ball Dia 3mm-100mm
304 Stainless Steel Bearing Balls — Precision Solid Metal Balls for Industrial & DIY Applications When a worn bearing seat, a seized valve, or a precision jig demands a replacement ball that won't corrode, deform, or fail under load, reaching for the wrong grade costs time and money. Engineers, machinists, and hands-on DIYers who work with fluid systems, linear guides, check valves, or custom fixtures need 304 stainless steel bearing balls they can trust across a wide size range without placing multiple orders. These 304 stainless steel bearing balls are solid, single-piece spheres machined to tight dimensional tolerances. Available in diameters from 3 mm (approx. 0.12 in) up to 100 mm (approx. 3.94 in), each ball is produced from 304-grade austenitic stainless steel — offering a balanced combination of corrosion resistance, surface hardness, and machinability. Quantity options range from single pieces to 500-piece bulk packs, letting you stock exactly what your project requires. Typical use cases include replacement balls in ball-check valves and pump assemblies, load-distributing elements in linear bearing tracks and drawer slides, precision reference spheres for jig-and-fixture setups, and decorative or functional hardware in furniture and architectural metalwork. The broad diameter range also makes these balls a reliable choice for hobbyist ball-mill media and laboratory mixing applications. ⚙️ Compatibility Note: These balls are dimensionally compatible with standard ball-bearing seats, check-valve bodies, and linear-guide channels sized for the selected diameter. Verify bore diameter and seat geometry against your application before ordering. ✅ Key Features of These 304 Stainless Steel Bearing Balls Wide Diameter Range (3 mm – 100 mm): A single source for balls from miniature 3 mm spheres up to 100 mm industrial-grade balls — reducing supplier fragmentation across projects. 304 Stainless Steel Construction: Austenitic 304 alloy delivers solid corrosion resistance in humid, wet, and mildly acidic environments without surface coatings that can flake or wear away. Solid One-Piece Sphere: No seams, no hollow cores — each ball is machined from solid bar stock, ensuring consistent weight distribution and load-bearing integrity under compression. Tight Dimensional Tolerance: Balls are produced to close sphericity tolerances, supporting smooth rolling action in bearing races, valve seats, and precision fixtures where runout matters. Flexible Quantity Packs: Order from 1 piece up to 500 pieces per SKU — suitable for single-unit repairs, small-batch production runs, or bulk stocking of maintenance inventory. Smooth Polished Surface Finish: The polished exterior reduces friction in rolling contact applications and minimizes particulate contamination in clean or food-adjacent environments. 📐 Technical Specifications — 304 Stainless Steel Bearing Balls Material 304 Stainless Steel (austenitic, 18/8 Cr-Ni alloy) Diameter Range 3 mm – 100 mm (approx. 0.12 in – 3.94 in) Form Factor Solid sphere, one-piece construction Surface Finish Polished (smooth, bright) Corrosion Resistance Suitable for humid, wet, and mildly acidic environments Hardness See variant options Sphericity Tolerance See variant options Available Quantities 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 30, 50, 80, 100, 300, 500 PCS Diameter Options 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 12.7, 13, 14, 15, 16, 17, 18, 19, 20, 28, 30, 31.75, 32, 34, 35, 36, 38.1, 39, 40, 42, 45, 48, 50, 50.8, 55, 60, 63.5, 65, 70, 75, 76.2, 80, 85, 90, 100 mm Application Types Check valves, linear bearings, ball screws, jig fixtures, decorative hardware, lab mixing ❓ Frequently Asked Questions How do I choose the correct ball diameter for my bearing or valve? Measure the inner diameter of the bearing race or valve seat using a caliper. The ball diameter should match the seat specification — typically listed in the equipment's service manual or stamped on the housing. For check valves, the ball must be slightly larger than the orifice to seal correctly; consult the valve's datasheet for the recommended ball size. When in doubt, contact us to confirm before ordering. Are these balls strong enough for load-bearing mechanical applications? 304 stainless steel has a tensile strength of approximately 515 MPa and a yield strength of around 205 MPa, making it suitable for moderate-load rolling and sliding contact applications. For high-load or high-speed precision bearing applications requiring tighter tolerances (ABEC 5 or higher), consider whether a hardened chrome steel or 440C stainless alternative may be more appropriate for your specific load and speed requirements. Will these balls rust or corrode in wet or outdoor environments? 304 stainless steel provides solid resistance to oxidation and corrosion in most ambient, humid, and freshwater environments. It performs well in mildly acidic conditions. However, it is not fully resistant to chloride-rich environments (such as saltwater or chlorinated pools) over extended exposure — in those cases, 316 stainless steel is generally recommended. For standard indoor plumbing, HVAC, and general industrial use, 304 is a reliable choice. Are these balls compatible with food-contact or laboratory applications? 304 stainless steel is widely used in food processing equipment and laboratory environments due to its non-reactive surface and ease of cleaning. The polished finish minimizes surface porosity. If your application requires certified food-grade compliance (e.g., FDA, EU 10/2011), please verify the specific certification requirements with your regulatory body, as material grade alone may not satisfy all documentation needs. What quantity pack should I order for a repair versus a production run? For single-unit repairs or prototyping, the 1–5 PCS options provide the most cost-effective entry point. For small-batch production or maintenance kits, the 10–50 PCS packs offer a better per-unit value. For ongoing production lines or stocking a maintenance inventory, the 100–500 PCS bulk packs deliver the lowest per-piece cost. Select your diameter first, then choose the quantity tier that matches your consumption rate. Can I use these balls as ball-mill grinding media or for mixing applications? Yes. Solid 304 stainless steel balls are commonly used as grinding media in small ball mills and as mixing elements in laboratory and industrial mixing vessels. The solid construction ensures consistent mass and impact energy. For abrasive grinding of hard materials, verify that the hardness of the balls exceeds that of the material being ground to avoid excessive ball wear. The smaller diameter options (3 mm – 20 mm) are most commonly used for this purpose. 🛒 Select your Diameter (mm) and Quantity (PCS) above, then add to cart.
5PCS, 10PCS, 15PCS, 20PCS, 30PCS, 2PCS, 4PCS, 6PCS, 8PCS, 1PCS, 3PCS, 50PCS, 100PCS, 300PCS, 500PCS, 80PCS