Heltec Mesh Node T114 Rev 2.0 (nRF52840 + SX1262, Display) Meshtastic & MeshCore EU868

A versatile low-power mesh node with a built-in display, ready for Meshtastic or MeshCore. The Heltec Mesh Node T114 Rev 2.0 combines an nRF52840 processor with an SX1262 LoRa radio and a 1.14" colour TFT display, all in an ultra-low-power design. This version is configured for the EU868 band with the display, making it an excellent choice for a fixed node, a repeater, or a desktop mesh device where you want to see status and messages at a glance. It works straight out of the box with every other Meshtastic and MeshCore device on your local mesh. This Version's Configuration Band: EU868 (863–870 MHz) Display: included (1.14" colour TFT) GPS: not included in this version. Ideal for fixed nodes and repeaters where position is static. If you need GPS for tracking, see our GPS-equipped nodes such as the Mesh Node T096 Why the T114? Colour TFT display: a 1.14" screen (135 x 240, up to 262k colours) shows messages, node status, and signal information directly on the device Ultra-low power: the nRF52840 draws just 23 µA in Meshtastic low-power mode, far below ESP32 boards, for excellent battery life on fixed nodes Reliable LoRa: the SX1262 radio provides solid long-range performance Flexible power options: USB-C, lithium battery, and solar panel connectors, so you can run it however your deployment needs Bluetooth 5.0: pair with the Meshtastic app on your phone for full messaging What You Can Build Fixed mesh node: a reliable always-on node for your home, office, or a fixed location, with a display to monitor activity Mesh repeater: extend the range of your local network from a static position Desktop Meshtastic device: a compact node with a clear colour display Solar-powered node: connect a solar panel and lithium battery for autonomous operation Specs MCU: nRF52840 (Bluetooth 5.0) LoRa chip: SX1262 Frequency: EU868 (863–870 MHz) Display: 1.14" TFT-LCD, 135 x 240, up to 262k colours GPS: not included in this configuration Low power: 23 µA in Meshtastic low-power mode, 11 µA in LoRaWAN deep sleep Interfaces: USB-C, 1.25 lithium battery connector, 1.25 solar panel connector, LoRa ANT (IPEX1.0), 2 x 13 x 2.54 header pins Power supply: USB-C 5V, lithium battery, or solar Operating temperature: -20 to 70°C, 90%RH (no condensing) Firmware: Meshtastic and MeshCore compatible, also supports LoRaWAN and the Arduino framework What's in the Box 1 × Mesh Node T114 Rev 2.0 with display (EU868) 1 × LoRa antenna SH1.25x2 battery connector 2.54 header pins Pair It With Flexible LoRa Whip Antenna (€17,95): upgrade the range with a tuned antenna Heltec 3000mAh Battery (€9,95): add power for portable and solar builds U.FL to SMA Male Cable (€5,95): route an external antenna out of your enclosure