Oyster Bracelet 20/16mm [Brushed]

The Oyster. Fully brushed. Adjust on the fly. The Oyster is the original sports bracelet — a three-link workhorse that's stayed in service since the 1930s for one reason: it just works. This is our take, in a uniform brushed finish from end-link to clasp, built for the modder who wants tool-watch character with none of the shine. What sets this one apart is the clasp. It's our first on-the-fly clasp — a Submariner-style deployant with nine hidden micro-adjustment positions you shift by hand, in seconds, with no tools. Dial your fit in the morning, loosen a notch when your wrist swells in the heat, tighten it back at night. No screwdriver, no spring-bar fumbling, no removing links to chase the perfect fit. Solid 316L stainless steel throughout, with solid end-links, eight removable links on screw-type pins, and two spring bars included. Made for our cases, finished to match. No tools. No guesswork. Fit dialled in seconds. The on-the-fly clasp does what link-removal alone never could — it adapts to your wrist through the day, not just on the bench. Adjust on the fly. Nine hidden micro-adjustment positions in the clasp — roughly 1.5mm apart — shifted by hand in seconds. No tools, no link removal: the fit moves with your wrist, not against it. Full-brushed, full stealth. A uniform brushed finish across every link and the clasp itself. No polished centre to catch light or show swirls — quiet, utilitarian, and forgiving of the micro-scratches daily wear earns. Built for our cases. The end-links are shaped to seat cleanly against Lucius Atelier case profiles — not a loose generic fit. It belongs on the case it was made for. Solid steel, screw-link. Solid 316L links with solid end-links, connected by screw-type pins — not friction collars. Set your base size with a screwdriver; fine-tune the rest at the clasp. Fits these Lucius Atelier cases Built for our case profiles — this bracelet fits across the Lucius Atelier case range. Two spring bars included. Tap any case to view it. Ultra Thin Edition 1908 36mm Steel · GMT-ready 1908 36mm Yellow Gold Yellow Gold · GMT-ready 62GS 36mm Steel · GMT-ready Pilot 34mm Steel · GMT-ready Explorer 36mm Steel Explorer 36mm DLC DLC Black Explorer 36mm Titanium Titanium · polished Explorer 36mm Titanium Titanium · sandblasted Seiko-Dweller 36mm Titanium Seikonaut 38mm Steel Seikonaut 38mm Titanium Titanium SKX013 Diver 38 Black Steel · diver SKX013 Diver 38 Green Steel · diver Classic range Datejust 36mm Steel Explorer 36mm v3 Steel Explorer II 36mm Steel · GMT-ready GS 36mm v2 Steel GS 39mm v2 Steel · GMT-ready GS Diver 36mm Steel · diver SKX013 Submariner 36mm Steel · diver SKX013 Submariner 36mm DLC DLC Black · diver SKX013 GS Diver 36mm Steel · diver SKX013 GS Diver 36mm DLC DLC Black · diver SKX013 Watch Case 38mm Steel · diver SKX013 Watch Case 38mm DLC DLC Black · diver Fits Lucius Atelier cases only The end-links are shaped to our case profiles — this bracelet does not fit generic 20mm lugs or OEM Seiko cases. Tighten the screws before wear Link screws ship slightly loose so you can resize easily. Before wearing, tighten every link screw fully — a small drop of threadlocker keeps them from backing out over time. Specs How To Fit & Resize What's Included Materials & Finish Quality Swiss Production Quality, ISO 9001 Certified Material 316L Stainless Steel Finishing Full brushed (links and clasp) Dimensions Lug Width 20mm Taper 20mm to 16mm Total Length 19.8cm Clasp & Links Clasp Type Rolex Submariner-style deployant, full brushed Clasp Length 44.7mm (exclusive on-the-fly clasp, unique to this bracelet) Adjustment 9 hidden on-the-fly micro-adjustments (~1.5mm apart, toolless by hand) Links 8 removable End-links Solid Spring Bars Included (2x) Compatibility Fits Lucius Atelier cases only — see the compatible-cases grid above. Set your base size The bracelet uses screw-type link pins; eight links are removable. Use a small screwdriver to remove links evenly from both sides until the bracelet sits close to your wrist size — then leave the rest to the clasp. Fine-tune on the fly Pull the adjustment link straight out of the clasp — perpendicular, until it releases with a sharp click. Holding it out, slide it back and forth across nine positions (about 1.5mm apart) to dial in your fit, then press it back into the clasp until it clicks to lock. No tools, no link removal — adjust it right on your wrist, even mid-day when it swells in the heat. Heads up: link screws ship slightly loose for easy resizing. Tighten them fully — ideally with a drop of threadlocker — before wear. 1x Oyster Bracelet 20/16mm [Brushed] 2x Spring Bars All photos of watches with modification parts are for illustration purposes only and are not included with the bracelet purchase.