EasyStand Evolv XT Sit-to-Stand Stander – 350 lb Capacity

Check the size before anything else. The XT is built for users 6′0″ to 6′10″ tall, up to 350 lb — the tallest and highest-capacity frame in the Evolv range. Under six feet, the Evolv Large (5′0″–6′2″, 280 lb) is usually the better fit. Near the boundary either way, call (866) 338-2838 or email info@morellimedical.com with the therapist's recommendation and we will check the measurements and build the quote — no cost, no obligation. EasyStand Evolv XT · PNG50209-1 Standing support that fits people the other frames don't Most standing frames stop around six feet. The Evolv XT is EasyStand's answer for the users left out: 6′0″ to 6′10″ tall and up to 350 lb, with a 20″–25″ seat depth and 17″–23″ seat-to-footplate range. It is the standard Evolv platform — same pivot-point geometry, same options catalogue — with the Extra Tall configuration included on every XT. Standing takes three steps — adjust, transfer, pump up — via the standard hydraulic actuator or the optional Pow'r Up electric lift, and at 112 lb on a 29.5″ × 37.5″ footprint it moves and stores like the rest of the range, not like a bariatric appliance. Who it fits Tall and larger adults — approximately 72″ to 82″ tall, up to 350 lb. For clinics, it extends a standing programme to the users a Medium or Large physically cannot accommodate, on the same platform staff already know. Same platform, XT catalogue The XT takes the Evolv options range in its own sizes — column and Mobile front frames, the shadow tray, transfer and rotating seats, and the complete set of backs, head, lateral and chest supports. Funding Coded HCPCS E0637 — combination sit-to-stand frame with seat lift feature. EasyStand publishes a funding guide and sample letter of medical necessity; ask us for both. Which Evolv XT, Large or Medium The three Evolv sizes are the same frame concept at different scales: Medium for 4′0″–5′6″ and 200 lb, Large for 5′0″–6′2″ and 280 lb, and this XT for 6′0″–6′10″ and 350 lb. Where height ranges overlap, seat depth decides — the XT's 20″–25″ suits longer thighs that run out of adjustment on the Large. Size to the user, not between users: measure, and if the numbers land on a boundary, call us before ordering. Two ways to buy Itemised build or support package An itemised build lets the therapist specify every component. A support package bundles a tested combination at a single price, with no substitutions. Packages are simpler to fund and quicker to order, but if the assessment calls for anything outside the bundle, itemise — the saving is never large enough to justify compromising the fit. We can quote both. Features 01 · Extra Tall Configuration Extra tall by design, not by stretch Every XT ships with the Extra Tall configuration built in — not a Large adjusted upward, but a frame dimensioned for 6′0″ to 6′10″ and up to 350 lb: 20″–25″ seat depth, 17″–23″ seat-to-footplate, a 19″ × 21.5″ seat at 23.5″ seat height. Despite the capacity, the base unit weighs 112 lb on a 29.5″ × 37.5″ footprint — it rolls and stores like the rest of the Evolv range. 6′0″–6′10″ · 350 lb 20″–25″ seat depth 112 lb base unit 02 · Positioning Supports that hold their line over a longer rise The Evolv geometry places the frame's pivot points in line with the body's own, so hip, lateral and head supports stay where the therapist set them from sitting to standing — and a taller user travels further between the two, so that discipline is worth more here than on any other size. The contoured seat delivers a maximum over-center stretch, and hip and knee contractures are accommodated through the multi-adjustable footplates — plantar, dorsi and toe-out each adjustable — and the independent knee pad option. Supports stay in place Minimised shear Adjustable footplate angles 03 · Lift Mechanism Raising 350 pounds without a fight The XT's standard manual hydraulic actuator is rated for the full 350 lb capacity, with enough mechanical advantage that many users pump themselves upright; handle options (adjustable/removable, quad grip, T-style) adapt it to limited grip or reach. The Pow'r Up electric lift replaces the pump with a light-touch button — at this weight class it is the upgrade to consider first, protecting the caregiver's back as much as it grants the user independence. Rated to 350 lb Pow'r Up option Independent standing 04 · Before You Order Fit, configuration and safe use The Evolv is sit-to-stand only — it does not recline to supine. If supine positioning is part of the programme for a user this size, call us before ordering and we will talk through what fits. A front frame and a matching tray are required selections — the base unit alone is not a complete stander. On the XT the frame families are column, shadow tray or mobile (frame and tray must match), the shadow tray requires a back, and unlike the Medium and Large, the XT does not offer the swing-away front. Configuration must come from the treating therapist. A stander without the correct support components can be unsafe to use. Send us the recommendation and we will build to it. Weight limit is 350 lb, height range approximately 6′0″ to 6′10″. Seat depth 20″–25″ and seat-to-footplate 17″–23″ are the more accurate sizing measurements — under six feet or near a limit, ask us about the Evolv Large instead. Read the instructions for use and assembly manual in full before first use, and follow the transfer method they describe. Standing programmes should be prescribed and supervised by the user's physician, physical therapist or occupational therapist. Morelli Medical supplies equipment and does not provide clinical assessment, prescribe therapy, or advise on standing protocols. Specifications EasyStand Evolv XT — Base Unit Model / SKU PNG50209-1 — every XT includes the PNG50377 Extra Tall Configuration Manufacturer Altimate Medical, Inc. — Morton, Minnesota HCPCS Code E0637 — combination sit-to-stand frame, any size including paediatric, with seat lift feature Frame Type Sit-to-stand only — supine not available on the Evolv series Approximate Height Range 6′0″–6′10″ (183–208 cm) Weight Limit 350 lb (159 kg) Seat Depth Range 20″–25″ (51–64 cm) from seat pivot Seat to Footplate Range 17″–23″ (43–58 cm) from seat pivot Seat Height / Seat Size 23.5″ seat height · 19″W × 21.5″L seat Footprint / Base Weight 29.5″ × 37.5″ at widest points (front swivel casters add 5″ width) · 112 lb basic unit Required Selections Front frame and matching tray from the same family — column, shadow tray or mobile (swing-away not available on the XT) Lifting Mechanism Manual hydraulic actuator with handle, standard · Pow'r Up electric lift optional Frame & Upholstery Charcoal frame · black upholstery · 5″ locking casters Supply Status Rx only — prescription or professional licence required before shipment Quality Certification Manufactured under ISO 13485:2016 certified quality management EasyStand Limited Warranty Steel Frame 5 years Hydraulic Actuator 2 years Electric Actuator & Hand Control 2 years, where the Pow'r Up lift is fitted Control Box, Battery & Charger 90 days Pads, Upholstery, Rubber, Paint, Bearings 90 days Sit-to-stand only. The Evolv series does not offer supine positioning and cannot be converted to it. If supine is part of the programme, ask us before ordering and we will talk through what fits a user of this size. Prescription required: this product is supplied Rx only. We verify a valid prescription or professional licence before shipment. If you do not have one, provide your prescriber's details and we will request it on your behalf. Configuration: each Evolv XT is built to the individual user. A front frame and matching tray are required selections, and support components should be specified by the treating physical or occupational therapist. Send us the recommendation and we will quote the build against it. Manufacturing quality: Altimate Medical, Inc. holds ISO 13485:2016 certification for medical device quality management systems, and manufactures in Morton and Redwood Falls, Minnesota. The company has been building standing frames since 1987. What's Included Evolv XT base frame with Extra Tall configuration Manual hydraulic actuator with handle Your selected front frame and matching tray Planar seat, standard — transfer, rotating or Roho-insert seats optional No-tray chest pad, standard 1-piece knee pad, standard Multi-adjustable foot plates, standard Transfer handles Two 5″ front wheels Two 5″ rear locking casters Black upholstery on a charcoal frame Commonly added: Pow'r Up electric lift, Easy-Adjust seat depth, rotating or transfer seat, back, head support, lateral supports, chest vest with high mount bracket, hip supports, positioning belt, angle-adjustable trays, independent knee pads, secure foot straps and hand grips. Documents & Resources Instructions for use ↗ Evolv XT itemised order form ↗ Funding guide for standing devices ↗ Standing log ↗ Range of motion chart ↗ How to order: call us on (866) 338-2838 or email info@morellimedical.com with the therapist's recommendation, the user's height and weight, and the front frame style required. We will confirm the fit, build the configuration and quote it — itemised or as a support package, whichever suits. The Evolv range runs from the Medium at 4′0″–5′6″ and up to 200 lb, through the Large at 5′0″–6′2″ and 280 lb, to this XT at 6′0″–6′10″ and up to 350 lb. Replacement pads, upholstery and support components are available separately.