Fyne Audio Vintage 10 Inch Bass Driver Floorstanding Model

Fyne Audio Vintage 10 Inch Bass Driver Floorstanding Model The Fyne Audio Vintage Ten is a premium two-way floorstanding loudspeaker that combines traditional cabinet craftsmanship with advanced point-source driver technology. Designed by Dr. Paul Mills, it features a 250mm (10-inch) IsoFlare driver incorporating a multi-fibre bass/midrange cone and a centrally mounted 75mm titanium alloy dome compression tweeter. The concentric driver arrangement provides coherent acoustic radiation and consistent directivity, supporting precise stereo imaging and natural musical reproduction. Fyne Audio's proprietary FyneFlute surround technology helps control unwanted cone resonances, while the downward-firing BassTrax Tractrix diffuser distributes low-frequency energy through a 360-degree wavefront for smooth bass integration. The handcrafted cabinet uses extensively braced birch plywood with natural walnut veneer, burr walnut inlays, and solid walnut detailing. Its proportions make it suitable for a wide range of dedicated listening spaces. A premium, hand-built crossover receives deep cryogenic treatment to optimize material stability and signal transmission. Front-mounted high-frequency energy and presence controls allow tonal adjustments to accommodate room acoustics and listener preferences. With 94dB sensitivity and bass extension down to 26Hz, the Vintage Ten combines efficient operation with substantial dynamic capability and full-range sound reproduction. Key Features Premium two-way floorstanding loudspeaker 250mm (10-inch) IsoFlare point-source driver 75mm titanium alloy dome compression tweeter Neodymium magnet system Multi-fibre bass/midrange cone FyneFlute surround technology Downward-firing BassTrax Tractrix diffuser Deep-cryogenically-treated crossover Bi-wire speaker terminals Adjustable high-frequency energy: ±3dB Adjustable presence: ±3dB Walnut veneer with solid walnut trim Extensively braced birch plywood cabinet Frequency response: 26Hz–26kHz (-6dB, typical in-room) Sensitivity: 94dB (2.83V/1m) Nominal impedance: 8 ohms Recommended amplifier power: 20–280W RMS Continuous power handling: 140W RMS Peak power handling: 560W Crossover frequency: 750Hz Dimensions (H x W x D): 1040 x 468 x 489mm Net weight: 54.6kg per speaker