Jar For F-003 Facial Steamer

Replacement Water Jar for the Silverfox F-003 Facial Steamer This is the clear water jar that twist-locks into the underside of the Silverfox F-003 Classic ozone facial steamer. Replace yours when it cracks, clouds over, chips at a locking tab, or goes missing. Part EFP440. What you get Direct fit: matches the original F-003 jar. No adapters, no modifications. Graduated markings: a volume scale runs up one side, so you fill to the same level every time. Twist-lock tabs: three tabs at the rim seat into the steamer head and lock with a turn. The loosen direction is marked on the jar. High-temp label: carries the same HIGH TEMP warning marking as the original. Fits Silverfox F-003 Classic ozone facial steamer Silverfox F-003 steamer and magnifying lamp combo Specifications Part number: EFP440 Sold as: one jar Seal ring: not included. Order EFPS003 separately. Care Empty the jar at the end of each service day. If you see mineral buildup, descale with a mild vinegar solution, then rinse and dry. Never run the steamer dry. Check the rim tabs and the seal ring whenever you refill, since a worn seal is the usual cause of steam escaping at the joint. Common questions Will this jar fit my other Silverfox steamer? No. This jar is cut for the F-003 head. The F-100C, F-101A, F-300 series and F-800 series each use their own jar. Does it come with the seal ring? No. The seal ring is a separate part, EFPS003. If your jar was leaking at the top, replace both at once. Do I need a new jar or a new seal ring? Steam or water escaping where the jar meets the head usually points to the seal ring. Cracks, heavy clouding, or a chipped locking tab mean the jar itself needs replacing.