Ecosoft Ecolite Demin Equilibrated Mixed Bed Ion Exchange Resin 25 L

Ecosoft Ecolite Demin Equilibrated Mixed Bed Ion Exchange Resin – 25 LEcosoft Ecolite Demin is an equilibrated, homogeneous, gel-type mixed bed ion exchange resin designed for direct water purification and the production of very low conductivity demineralised water. It combines a strong acid cation resin with a Type I strong base anion resin in a balanced mixed bed, supplied in the H+ / OH− forms ready for use.The resin is intended for polishing and demineralisation applications where very high water purity is required, including laboratory equipment, autoclaves, hot-water boilers with aluminium-alloy heat exchangers and portable pure-water systems used for window and solar panel cleaning.Key Features Equilibrated mixed bed ion exchange resin Strong acid cation plus Type I strong base anion resin Supplied in H+ / OH− ionic forms Designed for direct production of demineralised water Suitable for treated water conductivity below 0.1 µS/cm under appropriate operating conditions Gel-type polystyrene matrix crosslinked with DVB Homogeneous clear spherical beads 25 litre manufacturer-sealed bag Applications Hot-water boilers with aluminium-alloy heat exchangers Laboratory equipment Autoclaves Portable pure-water systems for window cleaning Portable systems for solar panel cleaning Production and polishing of high-purity demineralised water Typical Physical & Chemical Characteristics Resin type Strong acid cation / Type I strong base anion Matrix Gel, polystyrene crosslinked with DVB Cation functional group Sulfonic acid Anion functional group Quaternary ammonium Ionic form as supplied H+ / OH− Cation capacity – Na form 2.0 eq/L minimum Cation capacity – H form 1.9 eq/L minimum Anion capacity – Cl form 1.3 eq/L minimum Anion capacity – OH form 1.0 eq/L minimum Volume ratio – cation 40% Volume ratio – anion 60% Particle size 16–50 mesh, wet Uniformity coefficient 1.6 max. Sphericity 95% minimum Shipping weight 700–740 g/L approx. pH range 0–14 Suggested Operating Conditions Maximum temperature – non-regenerative bed 100°C Maximum temperature – regenerative bed 60°C Maximum operating temperature 120°C Minimum bed depth 0.7 m Service flow rate 20–60 BV/h Operating CapacityEcolite Demin is intended as a polishing mixed bed, and achievable throughput depends strongly on the conductivity and ionic load of the incoming water. Ecosoft's capacity guidance is based on feed water at 100 µS/cm conductivity, treated-water conductivity of 0.1 µS/cm and a service flow rate of 60 BV/h. Lower feed-water conductivity will generally provide a longer service cycle before exhaustion.Packaging & StorageProduct code: ECOLITED25 Pack size: 25 LStore in the original unopened packaging in a cool, dry area. Ecosoft recommends indoor storage between 0–40°C. If the resin is exposed to freezing temperatures, allow it to thaw naturally at room temperature and do not apply heat. Protect from contamination and do not store with toxic chemicals or strongly odorous substances.Guaranteed shelf life in original manufacturer packaging: 2 years for industrial water-treatment applications.