Shell Coolant Essential Ready to Use 33/67

Shell Coolant Essential Ready to Use 33/67 Shell Coolant Essential 33% is a ready-to-use engine coolant and antifreeze that comes pre-diluted with 33% monoethylene glycol (MEG) and 67% water, meaning it can be used directly without any mixing. It provides reliable protection against freezing down to about -18.5°C and helps maintain proper engine operating temperature. The product also has an alkaline pH of around 9.4, which supports corrosion protection within the cooling system and helps extend the life of engine components. Specifications, Approvals & Recommendations ASTM 03306 (meets requirements) BS 6580 (meets requirements) AFNOR NFR 15-601 (meets requirements) SAE J1034 (meets requirements) For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk Typical Physical Characteristics Properties Method Shell Coolant Essential Ready to Use 33/67 Freeze Point 100% val °C ASTM D1177 -18.5 pH ASTM D1287 9.4 Density @ 20°C (kg/m³) ASTM D4052 1050 Reserve Alkalinity ASTM D1121 5.5 Colour Visual Blue-green These characteristics are typical of current production. Health, Safety & Environment Health and Safety This product is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used coolant. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from https://www.epc.shell.com/ Protect the Environment Take used coolant to an authorised collection point. Do not discharge into drains, soil or water.