Cascada 26" Adjustable Stainless Steel Slide Bar with 360° Adjustable Handheld Shower Holder
A handheld shower is only as good as what's holding it. The Cascada 26" Sliding Shower Bar gives you smooth height adjustment, a 360° rotating holder, and a solid 304 stainless steel build — so whoever is using the shower, at whatever height, gets the angle they need without wrestling with a stiff bracket or a holder that slips back down between uses. Why This Bar Holds Up Better Than Standard Options Full 304 stainless steel construction with brass holder — not chrome-plated plastic. The bar itself is stainless steel, and the handheld cradle is brass — a heavier, more corrosion-resistant material than the ABS holders that come standard on most sliding bars. Both hold their finish and structural integrity in daily wet conditions. Side-knob height adjustment that actually locks — loosen the knob, slide the holder to any position along the 26.2" bar, tighten. The holder stays exactly where you put it until you move it again. No ratchet mechanism to skip, no gravity pull when the knob isn't perfectly tight. 360° rotating shower cradle — the holder rotates freely around a full circle, so the handheld shower head can angle up, down, sideways, or any point between. Useful for directing spray while seated, rinsing children, or reaching specific areas without repositioning your body. Wider cover plates hide old screw holes — if you're replacing an existing shower bar, the larger decorative covers are specifically sized to conceal the wall holes left by the previous installation. Clean wall finish without patching, painting, or retiling. Five finish options — one for every bathroom — Polished Chrome, Brushed Nickel, Matte Black, Brushed Gold, and Polished Gold. Each finish is the same 304 stainless steel and brass construction — the choice is purely aesthetic, not a compromise on material quality. Everything included for installation — mounting screws, decorative covers, and the brass holder ship in the box. Wall-mount installation requires only drilling — no specialist tools, no additional hardware to source. The Details That Make It Work 📏 26.2" Adjustable Range The full bar length is 26.2 inches (665mm) — enough vertical range to comfortably serve users from around 5' to 6'4" without the holder reaching the end of its travel. The adjustment range works for seated use as well, making this bar practical for accessible shower setups where the handheld head needs to reach a lower position. 🔩 304 Stainless Steel + Brass Build 304 stainless steel is the standard grade for wet architectural hardware — it resists rust, holds its shape under daily use, and doesn't react with water or cleaning products. The brass holder adds a secondary material layer where the handheld shower makes contact — brass is denser than stainless and naturally antimicrobial, which is why it's used in plumbing fittings rather than lighter alloys. 🔄 360° Rotating Holder The cradle at the top of the sliding bracket rotates a full 360° around its mounting point. Set the handheld shower to face straight down for a standard position, angle it forward for rinsing, or rotate it sideways for targeted spray — it holds position at whatever angle you set it without needing a locking mechanism. 🏠 Clean Wall Finish After Installation The included decorative cover plates sit flush against the wall at each mounting point. They're sized wider than standard covers specifically to overlap the footprint of most previous shower bar installations — so upgrading from an older bar doesn't leave visible holes or require wall repair before the new bar goes up. Who This Is For This sliding bar suits any household where shower users have meaningfully different heights — families with children, couples with a height difference, or anyone who uses a handheld shower for seated bathing. It's also the right replacement choice when your existing bar has a holder that no longer locks, a finish that's corroded, or mounting hardware that's pulled away from the wall. The wider cover plates make it a clean drop-in replacement without cosmetic repair work. Technical Specifications Brand: Cascada Showers MPN: CSPJ0485 Style: Modern square Material: 304 stainless steel bar + brass shower holder Total Bar Length: 26.2" (665mm) Holder Rotation: 360° free rotation Adjustment Method: Side-knob loosen and slide Installation: Wall-mounted with screws Available Finishes: Polished Chrome | Brushed Nickel | Matte Black | Brushed Gold | Polished Gold 📦 What's in the Box Sliding shower bar × 1 Brass handheld shower holder × 1 Mounting screws × 1 set Decorative wall covers × 1 set Select your finish above — same stainless steel and brass construction across all five options, matched to whichever finish your existing fixtures use.
Polished Chrome, Brushed Nickel, Matt Black, Brushed Gold, Polished Gold