Bambu Lab X2D 3D Printer

Bambu Lab X2D Why Choose Bambu Lab X2D Dual nozzle. Servo Extruder. Dual-intake cooling. Active heating. Adaptive Calibration. AI Monitoring. Certified Emissions. Dual Nozzle System. Stop overthinking with support - start peeling it off clean. The main nozzle prints the part. The auxiliary nozzle handles the support. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean. Add more color, more details and more fun. Tough and soft. In one print Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use. Swap colors instantly. Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste. Finer. Sharper. True to the design. Tap. Switch. Done. Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap. A lighter toolhead means less inertia and vibration. Even at full speed, surfaces stay flawless - all the way to the top. Cool it. Before gravity makes it droop. Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean. Hot Enough Isn't Enough. Heat It Even. The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber - hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn't the point - the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat. Calibration adapts to wear and material changes. Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn't. Flow Dynamics Calibration builds a time-varying, nonlinear model of your entire extrusion system. So whether there's minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat. PMSM Servo System: Smoother surfaces start inside the extruder. Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface. Smooth surface quality. Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print. Specifications Category Item Specification Printing Technology Fused Deposition Modeling Body Build Volume (W*D*H) Main Nozzle Printing: 256*256*260 mm³ Auxiliary Nozzle Printing: 235.5*256*256 mm³ Dual Nozzle Printing: 235.5*256*256 mm³ Total Volume for Two Nozzles: 256*256*260 mm³ Chassis Plastic and Steel Outer Frame Plastic, Glass, and Metal Dimensions and Weight Physical Dimensions 392*406*478 mm³ Net Weight 16.25 kg Toolhead Extruder Gear Hardened Steel Nozzle Hardened Steel Max Nozzle Temperature 300 °C Included Nozzle Diameter 0.4 mm Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm Filament Cutter Built-in Filament Diameter 1.75 mm Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor Auxiliary Extruder Extruder Gear Hardened Steel Extruder Motor Stepper Motor Heatbed Build Plate Material Flexible Steel Plate Included Build Plate Type Textured PEI Plate Supported Build Plate Type Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack, Engineering Plate Max Heatbed Temperature 120 °C Speed Max Speed of Toolhead 1000 mm/s Max Acceleration of Toolhead 20,000 mm/s² Max Flow for Hotend 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature) Chamber Temperature Control Active Chamber Heating Supported Max Temperature 65 °C Air Purification Pre-filter Grade G3 HEPA Filter Grade H12 Activated Carbon Filter Type Granulated Coconut Shell VOC Filtration Supported Particulate Matter Filtration Supported Cooling Part Cooling Fan Closed Loop Control Hotend Cooling Fan Closed Loop Control Main Control Board Fan Closed Loop Control Chamber Heat Circulation Fan Closed Loop Control Auxiliary Part Cooling Fan Closed Loop Control External Exhaust Fan Closed Loop Control Filament Supported (Main Hotend) PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET Filament Supported (Auxiliary Hotend) Type PLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET Print with Caution PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS, Support for PA/PET Sensor Live View Camera Built-in; 1920*1080 Toolhead Camera Built-in; 1600*1200 Door Sensor Supported Filament Run Out Sensor Supported Filament Tangle Sensor Supported Filament Odometry Supported with AMS Power Loss Recovery Supported Electrical Requirements Voltage High-voltage version: 200-240 VAC, 50/60 Hz Low-voltage version: 100-120 VAC, 50/60 Hz Max Power High-voltage version: 1600 W@220 V Low-voltage version: 1100 W@110 V Steady-State Power High-voltage version: PLA (25 °C): 250 W@220 V / PC (25 °C): 550 W@220 V Low-voltage version: PLA (25 °C): 250 W@110 V / PC (25 °C): 550 W@110 V Environment Requirements Operating Temperature 10 °C-30 °C Electronics Touchscreen 5-inch 1280*720 Touchscreen Storage Built-in 8 GB EMMC and USB Port Control Interface Touchscreen, mobile App, PC App Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7 Application Processor Quad-core ARM with dedicated NPU Software Slicer Bambu Studio; Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. Supported Operating System MacOS, Windows, Linux Network Control Ethernet Not Available Wireless Network Dual-Band Wi-Fi Network Kill Switch Not Available Removable Network Module Not Available 802.1X Network Access Control Not Available Wi-Fi Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC) Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) Wi-Fi Protocol IEEE 802.11 a/b/g/n What's In The Box X2D X2D AMS Combo X2D ✓ ✓ Textured PEI Build Plate ✓ ✓ External Exhaust Fan Bundle ✓ ✓ Accessory Box ✓ ✓ Spool Holder ✓ ✓ AMS 2 Pro (combo version) - ✓