Carbon Fiber Interior Trims for Audi A6 S6 RS6 C7 (2011 to 2018)

Carbon Fiber Interior Trim for Audi A6 / S6 / RS6 C7 — 9-Piece Set The Audi A6 C7 is one of the most successful executive sedans of its generation — refined, understated, and built to cover serious miles in serious comfort. This 9-piece genuine carbon fiber interior trim kit elevates the cabin from factory-standard to something with real visual weight. Covering the dashboard, all four door panels, and the center console, the complete set replaces the factory trim with real carbon fiber — a material upgrade that adds depth and contrast to an interior designed around clean lines and quiet quality. Built for the Executive Driver Who Wants More The Audi A6 C7 interior is excellent from the factory. It's well-assembled, logically laid out, and ages well. But the standard trim options — brushed aluminium, wood inlays, piano black — were chosen to be inoffensive rather than distinctive. They blend in. They don't give the cabin a character of its own. Carbon fiber changes that. The woven pattern introduces depth and texture that flat factory finishes cannot replicate. It's the one material upgrade that makes the interior feel genuinely different without disrupting the A6's clean, understated design language. On the RS6 Avant C7 — one of the most iconic performance wagons ever built — the effect is the most natural. Carbon fiber trim is not an add-on here. It's the material the interior should have started with. Complete 9-Piece Carbon Fiber Interior Set Dashboard — 1 Piece A carbon fiber dashboard trim panel cover the primary visible surfaces flanking the C7's retractable MMI screen — the natural focal point of the driver's forward view. Door Panels — 4 Pieces Four matching carbon fiber door trim panels cover the interior inserts across all four doors. All four treated identically — the same real carbon fiber finish front and rear, for a consistent look throughout the cabin. Center Console — 4 Pieces Four carbon fiber center console trims address the most tactile area of the C7 cabin — the trim surrounding the MMI rotary controller, the gear selector, and the storage area between driver and passenger. Vehicle Compatibility This Audi C7 carbon fiber interior trim kit is designed for: ✓ Compatible Audi Models Model Generation Years Audi A6 Sedan C7 (4G) 2011 – 2018 Audi A6 Avant C7 (4G) 2011 – 2018 Audi S6 Sedan / Avant C7 (4G) 2012 – 2018 Audi RS6 Avant C7 (4G) 2013 – 2018 ⚠️ The A6 and A7 C7 do not share the same interior architecture and dashboard layout. This kit is specifically shaped for the A6/S6/RS6 — do not order the A7 version for an A6 body. Audi offered several interior trim configurations during the C7's production run, including a mid-cycle facelift in 2014. Compare the supplied panels against your existing interior before ordering. Genuine Carbon Fiber Construction — Not a Wrap or Overlay These are not carbon-effect stickers, printed plastic panels, or vinyl wraps. Each piece uses real carbon fiber with a 2x2 twill weave, giving every panel the characteristic depth and reflective quality of genuine composite material. A high-gloss clear coat provides the protective finish — enhancing the weave pattern while guarding against UV exposure, light abrasion, and everyday interior contact. The carbon weave direction is aligned across the full set for a consistent, cohesive appearance once all nine pieces are installed. OEM-Level Fit and Integration Each Audi A6 C7 carbon trim panel is shaped around the C7's original trim geometry. Installed, the pieces sit flush against adjacent surfaces — controls, the retractable MMI screen, and surrounding panels remain in factory position and function exactly as before. This makes the upgrade well-suited to an OEM+ build: a more premium-looking interior that reads as intentional rather than modified — the kind of subtle upgrade that only people who know the car will notice. Direct-Fit Installation — No Permanent Modification No cutting, no drilling, no permanent alteration to the vehicle. Remove the factory trim using a plastic trim removal tool. Clean the mounting area and check that original clips are clear. Position the carbon fiber panel against the factory mounting locations. Press firmly and evenly into place. Confirm flush fit before moving to the next panel. Allow approximately 30–60 minutes for the complete set. Original trim panels can be retained and reinstalled — the modification is fully reversible. Carbon Fiber Trim for the RS6 Avant — The Interior the Exterior Deserves The RS6 Avant C7 needs no introduction. A twin-turbo V8 producing up to 605 horsepower in Performance specification, packaged inside a family wagon that can hold a pushchair and a set of golf clubs while running sub-4-second sprints. It's one of the most celebrated performance cars of the last decade, and its interior should reflect that. Real carbon fiber trim brings the cabin's material quality in line with the RS6's performance credentials — something the factory brushed aluminium never quite managed to do. On the A6 and S6 C7, the same set delivers a cleaner, more purposeful cabin without requiring factory-order options that are no longer available. Pair with exterior carbon fiber accessories or RS-spec mirror caps for a unified carbon fiber interior and exterior aesthetic. Product Specifications Compatible Models Audi A6 / S6 / RS6 C7 Model Years 2011 – 2018 Material Genuine carbon fiber Weave 2x2 twill Finish High-gloss clear coat Number of Pieces 9 Coverage Dashboard (x2), 4 door panels, center console (x3) Installation Direct-fit / factory mounting points Modification Required None Reversible Yes Warranty 1 Year Frequently Asked Questions Is this genuine carbon fiber? Yes. Real carbon fiber with a 2x2 twill weave and high-gloss clear coat. Not vinyl, not printed plastic, not a carbon-effect overlay. Does the kit fit the A6, S6, and RS6 C7? The kit is designed around the C7 interior platform shared across these models. Because Audi offered multiple interior configurations, verify fitment against the product images before ordering. Is this the same kit as the A7 C7? No. The A6 and A7 share the same interior architecture but the trim panels are shaped differently. Order the A6-specific kit for your vehicle. Does it fit both Sedan and Avant? Yes. The A6 Sedan and A6 Avant share the same dashboard, door panel, and center console trim. The kit fits both body styles. What changed with the 2014 facelift? Audi updated the C7 A6's exterior and some interior details in 2014. The trim panel mounting geometry remained the same across pre-facelift and facelift models. Compare product images to your existing panels before ordering. Can I install this myself? Yes. The direct-fit installation suits a DIY enthusiast with basic trim removal experience. Plastic trim tools are recommended. Is the modification reversible? Yes. Retain your original trim panels. Fully reversible — reinstall at any time. Will the weave pattern match across all nine pieces? The full set uses the same 2x2 twill carbon fiber weave with aligned grain direction. Minor natural variations in reflection are characteristic of genuine carbon fiber and are not a defect. How do I clean the carbon fiber trim panels? Soft microfiber cloth and a mild automotive interior cleaner. Avoid abrasive products that could damage the high-gloss clear coat. Upgrade Your Audi A6 C7 Interior Nine panels. Dashboard, four door panels, and center console. Real carbon fiber, 2x2 twill weave, high-gloss clear coat, vehicle-specific fit, reversible installation. The most impactful Audi A6 C7 interior upgrade available without modifying a single factory component. Every order includes Free Shipping and a 1-Year Warranty.