Lake Country Snappy Clean Boost Pad Cleaning Powder

Lake Country Snappy Clean Boost Pad Cleaning Powder If you picked up the System 4000 Pad Washer, this is the other half of the equation. Snappy Clean Boost is the cleaning powder Lake Country designed the washer around, and it's what actually breaks the dead compound and polish out of your pads while the machine does the agitating. Here's the thing about pad cleaning that most people get wrong: water alone doesn't cut it. Polish and compound oils bond into the foam structure, and if you just rinse and squeeze, you're leaving spent abrasives and carrier oils buried in the pad. Next time you polish, that contamination comes back out onto your paint. Snappy Clean Boost is a concentrated powder that chemically releases wax, polish, and compound buildup from foam, wool, and microfiber pads in just a few minutes of soaking. The pad comes out clean, soft, and supple instead of stiff and crusty. Using it with the System 4000 is dead simple: fill the pail with water, dump in one packet, and run your pads through per the washer's instructions. No pad washer? It still works. Fill a bucket with water, add the powder, drop your dirty pads in to soak for a few minutes, then agitate with a pad brush and rinse. Either way, the formula rinses out completely with no residue left behind to interfere with your next polishing session. It's biodegradable and non-flammable, so you're not dealing with harsh solvents in your garage or dumping anything nasty down the drain. Clean pads cut correctly, finish better, and last dramatically longer. If you're going to reuse pads at all, use this. Features Concentrated powder formula releases wax, polish, and compound buildup from pad material in minutes of soaking Safe for foam, wool, and microfiber pads Keeps pads clean, soft, and supple instead of stiff with dried product Rinses out completely with no residue to contaminate your next polishing session Biodegradable and non-flammable Formulated for use with the Lake Country System 4000 Pad Washer, but works just as well for bucket soaking Extends pad life so you replace pads less often How To Use With the System 4000 Pad Washer: Fill the pail to the desired level with clean water. Empty one packet into the water. Clean pads per the pad washer's operating instructions. Bucket soak method: Fill a bucket with water and add the powder. Submerge dirty pads and let them soak for a few minutes. Agitate with a pad brush, then rinse thoroughly and let pads dry completely before storage.