Corvette C8 Carbon Fiber GM Factory Style Double-Sided Replacement Removable Targa Roof Panel

COUPE ONLY Product Overview Upgrade your 2020-present Chevrolet Corvette C8 Coupe with this GM Factory Style Double-Sided Carbon Fiber Replacement Removable Targa Roof Panel. Designed as a full replacement roof panel rather than a stick-on overlay, it delivers a bold exposed-carbon appearance on both the exterior canopy and interior framework. Built for C8 Coupe owners who want a motorsport-inspired upgrade, this roof panel is precision-contoured for standard mid-engine Coupe targa glass hatch tracks, including applicable Stingray, Z51, Z06, E-Ray, ZR1, and ZR1X Coupe configurations listed below. It is not compatible with Hardtop Convertible (HTC) models. The exterior surface features a 3K twill carbon fiber weave aligned along the vehicle centerline and finished with a high-gloss UV-protected clear coat. The double-sided carbon fiber construction helps reduce high-mounted vehicle mass compared with factory composite-style panels while adding a premium performance appearance. Constructed from real prepreg carbon fiber composites using dry autoclave manufacturing methods, the panel uses carbon fiber material throughout both the outer canopy skin and internal headliner-style skeletal layout. The carbon fiber finish and carbon fiber color provide a cohesive exposed-weave look inside and outside the vehicle. This top-mounted roof panel is precision-molded using 3D vehicle scanning for a 1:1 factory-style footprint. It is designed for direct bolt-on and latch-on installation with OEM roof handles, locking hardware components, locator pins, side weatherstripping tracks, and interior trim pieces transferred as needed. Note: Fits 2020-present Chevrolet Corvette C8 Coupe models as detailed in the compatibility table. This product is for Coupe targa roof applications only and is completely incompatible with Hardtop Convertible (HTC) setups. Key Features GM Factory Style Replacement Roof Panel Designed as a complete structural replacement for the factory painted, translucent acrylic, or single-sided fiberglass-style targa top. Provides clean original-style body lines without using a stick-on overlay shell. Double-Sided Carbon Fiber Construction Engineered with authentic carbon composite layers across both the exterior canopy face and the internal headliner framework. Material: carbon fiber; surface finish: carbon fiber; color: carbon fiber. High-Gloss UV-Protected Finish Features an exposed 3K twill carbon fiber weave beneath a brilliant high-gloss clear coat. The UV-protected coating is designed to help resist sun fading, scratching, heat clouding, and weather-cycle wear. Precision Coupe Fitment Precision-contoured for 2020+ Chevrolet Corvette C8 Coupe models, including applicable Stingray, Z51, Z06, E-Ray, ZR1, and ZR1X Coupe trims listed below. Sculpted specifically for standard mid-engine Coupe targa glass hatch tracks and not for HTC models. Factory-Style Mounting Footprint Advanced 3D-scanned layout lines are designed to align with the windshield frame and rear B-pillar seams. Exact channel dimensions help preserve the operational integrity of factory weatherstripping channels for a tight perimeter seal. Direct Bolt-On and Latch-On Setup Built with 1:1 factory-style mounting perimeters to accept transferred stock roof handles, locking latches, locator pins, side weatherstripping tracks, and interior trim pieces. Drilling is not required for installation. Package Included Includes 1 Chevrolet Corvette C8 Coupe GM Factory Style Double-Sided Carbon Fiber Replacement Removable Targa Roof Panel assembly. Number of pieces: 1; placement on vehicle: top; manufacturer part number: ROOF-1355-BKCF. Hardware Details Assembly hardware is not included; re-use any necessary OEM hardware for direct bolt-on installation. Source description also notes standard alignment pin hardware, fasteners, and mounting screws may be pre-bundled to assist rebuild tracks; verify included components before installation. Installation Installation Manual Is NOT Included Direct bolt-on installation; drilling is not required. Re-use any necessary OEM hardware and transfer the required factory roof handles, locking hardware components, locator pins, weatherstripping tracks, and trim pieces as applicable. Professional installation is recommended to ensure proper alignment, sealing, latch operation, and fitment. Vehicle Compatibility Year Make Model Trim 2027 Chevrolet Corvette Z06 Coupe 2-Door 2027 Chevrolet Corvette ZR1 Coupe 2-Door 2027 Chevrolet Corvette ZR1X Coupe 2-Door 2026 Chevrolet Corvette E-Ray Coupe 2-Door 2026 Chevrolet Corvette Stingray Coupe 2-Door 2026 Chevrolet Corvette Z06 Coupe 2-Door 2026 Chevrolet Corvette ZR1 Coupe 2-Door 2026 Chevrolet Corvette ZR1X Coupe 2-Door 2025 Chevrolet Corvette E-Ray Coupe 2-Door 2025 Chevrolet Corvette Stingray Coupe 2-Door 2025 Chevrolet Corvette Z06 Coupe 2-Door 2025 Chevrolet Corvette Z51 Coupe 2-Door 2025 Chevrolet Corvette Z51 Performance Coupe 2-Door 2025 Chevrolet Corvette ZR1 Coupe 2-Door 2024 Chevrolet Corvette E-Ray Coupe 2-Door 2024 Chevrolet Corvette Stingray Coupe 2-Door 2024 Chevrolet Corvette Z06 Coupe 2-Door 2024 Chevrolet Corvette Z51 Coupe 2-Door 2024 Chevrolet Corvette Z51 Performance Coupe 2-Door 2023 Chevrolet Corvette Stingray Coupe 2-Door 2023 Chevrolet Corvette Z06 Coupe 2-Door 2023 Chevrolet Corvette Z51 Coupe 2-Door 2023 Chevrolet Corvette Z51 Performance Coupe 2-Door 2022 Chevrolet Corvette Stingray Coupe 2-Door 2022 Chevrolet Corvette Z51 Coupe 2-Door 2022 Chevrolet Corvette Z51 Performance Coupe 2-Door 2022 Chevrolet Corvette Z51 Special Edition Coupe 2-Door 2021 Chevrolet Corvette Stingray Coupe 2-Door 2021 Chevrolet Corvette Z51 Coupe 2-Door 2021 Chevrolet Corvette Z51 Performance Coupe 2-Door 2020 Chevrolet Corvette Stingray Coupe 2-Door 2020 Chevrolet Corvette Z51 Coupe 2-Door 2020 Chevrolet Corvette Z51 Performance Coupe 2-Door