Universal Topographic Partial Wrap – Custom Vinyl Sheet

Build your own custom vehicle graphic with this Universal Topographic Partial Wrap. Supplied as a single printed sheet in your chosen size — position it where you want, trim it to fit your panel, and get a professional partial-wrap finish without paying for a full vehicle wrap. Works on vans, SUVs, 4x4s, pickups, campers, trailers and cars. Custom fit: Universal fit — supplied as a rectangular sheet to trim on the vehicle Design: Vertical black-to-cool-steel fade with topographic contour map pattern Sizes: Height 400 / 600 / 800 / 1000 mm × Width 1000 to 3000 mm (in 200 mm steps) – choose at checkout Material: ORAJET 3551RA printed air-release vinyl with laminate protection Protection: Laminated for added UV, weather and mechanical resistance Finish: Matte or glossy laminate – choose at checkout Durability: 5–7 years outdoor life under normal conditions Installation: Dry application recommended – trim excess vinyl on the vehicle during fitting Use: Waterproof, suitable for outdoor and indoor application Please note: Dimensions listed as height × width. The black-to-grey fade runs vertically across the height of the graphic. What's included: 1 × printed and laminated Universal Topographic Partial Wrap sheet in your selected size and finish. Wrapping both sides of a vehicle? Order two sheets. Need a size not listed? Send us a message and we'll cut it to fit your project. Colours may look slightly different depending on your screen and lighting — reference photos on real vehicles are the most accurate representation. Installation tips Clean and degrease the surface before fitting. Position the graphic, apply gradually with a squeegee, and trim excess vinyl around panel edges, doors and body lines. For larger sizes (800 mm height and above), a second person makes installation significantly easier.