Color Lab - Titanium 5/16-18x1 Rear Hub Pinch Bolt

Turn wrenches, turn heads. Color Lab brings race grade titanium hardware in bold, lab tuned anodized hues: ultra light, ultra strong, unmistakably yours. This is the 5/16-18 x 1 in socket head rear hub pinch bolt, the fastener that clamps a split rear hub onto the axle on outlaw karts and junior sprints.A pinch bolt lives a hard life. It has to hold clamp against the axle through every launch, every slide job and every curb hop, and it does it while sitting out in the dirt and the wash water. Grade 5 titanium gives you the strength for that at roughly half the density of steel, and it will not rust itself into the hub between seasons.The heads are drilled for safety wire, so once you have set your clamp you can wire the bolt and stop thinking about it. These pair especially well with our Revolver Rear Hubs. Material: grade 5 titanium Thread: 5/16-18 Length: 1 in Head: socket head, drilled for safety wire Finish: anodized, eight Color Lab colors Weight: 7.2 g, plus or minus 0.5 g Price is per bolt, so order the count your hub takes. Revolver Rear Hubs are sold separately.Colors, left to right in the first image: Go for Gold, Victory Violate, Royal Blue, Five Three Blue, Chartreuse, Pink Lemonade, Pearl, Oil Slick.Actual colors may vary slightly. Victory Violate and Royal Blue are close, though in person there is a slight shade difference in direct light. Pink Lemonade appears pink with light touches of yellow on the edges of the threads. The finish on both Pink Lemonade and Pearl may come out matte. Over time the anodizing may wear off the threads or off the head from wrench contact, so take care while installing to get the longest color life.All colored hardware is made to order. Please allow 1-2 business days for processing.