PROSOCO SureGrout S60 High-Strength Grout – 3 Liter Tub
PROSOCO SureGrout S60 is a high-strength, two-part, thixotropic Portland cement grout designed for use with helical anchors and helical joint-reinforcing applications. The formula combines high-quality graded silica sand with a specialized blend of admixtures to provide strong, dependable anchorage within masonry substrates. SureGrout S60 is non-shrink, non-gaseous and formulated to resist bleeding and settlement. Its thixotropic consistency allows the mixed grout to be injected into prepared slots and holes using the PROSOCO Manual Bulk Grout Gun. The chloride-free, nitrate-free and non-corrosive formulation is suitable for masonry repair and reinforcement applications requiring high bond and compressive strength. Features & Benefits High-strength, two-part Portland cement grout Designed for helical anchors and helical joint reinforcement Thixotropic consistency supports controlled injection Non-shrink and non-gaseous formulation Free of bleeding and settlement Chloride free and nitrate free Non-corrosive and non-oxidizing Provides high tensile and shear bond strength Achieves 8,700 psi compressive strength after 28 days Nonflammable with a Class A1 fire rating Complies with national, state and district VOC regulations Recommended Applications Grouting helical anchors into masonry Helical joint-reinforcing and crack-stitching applications Filling prepared holes and slots in masonry substrates Structural masonry repair and reinforcement Mixing and Application Pour the supplied liquid component into the provided bucket. Slowly add the dry powder and mix with a paddle mixer for two full minutes, ensuring the powder is completely blended. Do not add additional water or powder. Load the mixed grout into the PROSOCO Manual Bulk Grout Gun, attach the appropriate nozzle and inject the grout into the prepared slot or hole. The grout-gun cartridge should be emptied within five minutes of filling. Required Application Equipment Three-jaw chuck rotary or mixing drill Paddle mixer PROSOCO Manual Bulk Grout Gun Appropriate crack-stitching or injection nozzle Application Conditions Apply only when surface and air temperatures are at least 40°F (4°C). Protect the installed grout from freezing for a minimum of 24 hours. Substrates must be clean and free of oils, organic growth, dust and debris. Saturate the repair area with water before application, but do not install over ponding water or in waterlogged holes.