Skylotec Surface Mount Fall Arrest Anchor

SKYLOTEC Surface Mount Fall Arrest Anchor The SKYLOTEC Surface Mount Fall Arrest Anchor is a stainless steel stationary anchor point specially designed for trapezoidal steel sheet profiles. It is certified in accordance with AS/NZS 5532:2013 and is designed for use on roofs and facades. This surface mount fall arrest anchor is used as a single anchorage point for PPE and as a substructure for cable systems. The multifunctional design allows it to operate as both a single anchor point and system support in one. The pre-assembled swivel support is supplied ready for installation with sheet metal screws and bulb-type rivets, making installation quick and easy for suitable trapezoidal sheet metal applications. Key Features Surface mount fall arrest anchor by SKYLOTEC Specially designed for trapezoidal steel sheet profiles Used as a single anchorage point for PPE Can be used as a substructure for cable systems Multifunctional: single anchor point and system support in one Pre-assembled swivel support supplied ready for installation Installation with sheet metal screws and bulb-type rivets Certified in accordance with AS/NZS 5532:2013 Stationary anchor point type Stainless steel construction Maximum number of persons: 1 Suitable application areas: work on roofs and facades Applications Work on roofs Work on facades Trapezoidal steel sheet profiles Installation & Use Notes This system must only be installed by qualified individuals trained in the selection, use and maintenance of fall arrest systems, and who hold a valid SKYLOTEC installer certification. The structural integrity and suitability of the roof structure must be verified by a structural engineer, unless a competent person can clearly confirm it is appropriate for system attachment. System design, supply, configuration, installation and certification must be carried out by a SKYLOTEC-approved installer in accordance with the manufacturer’s instructions and current industry standards. The surface mount anchor is suitable for single person use and rescue in the case of a fall incident. The number of users connected to each anchor must not exceed the specified maximum capacity. This anchor is not designed for lifting or tethering tools, machinery or equipment. Surface-mount anchors must not be used when working on surfaces steeper than 40°. Inspection and recertification of fall anchors and equipment is required at least every 12 months by a competent person in accordance with manufacturer specifications and AS/NZS 1891.4:2009 Section 9. Specifications Product Surface Mount Fall Arrest Anchor Brand SKYLOTEC Application areas Work on roofs and facades Maximum lifetime 15 years Rope access technique No Usable in SEAL PAC No Minimum temperature -20 °C Maximum temperature 80 °C Type mounting base Trapezoidal sheet metal Mounting type Sheet metal screws, rivets Anchor point type Stationary anchor point Maximum number of persons 1 Material Stainless Steel Diameter bore 8 mm Diameter pillar 0 mm Hole spacing A 257 mm Hole spacing B 228 mm Standards AS/NZS 5532:2013 E-class number 40-02-01-90 Construction height 80 mm Foot plate length 285 mm Foot plate width 275 mm Product length 275.00 mm Product width 285.00 mm Product height 80.00 mm Colour Silver Net weight 1.25 kg Gross weight 1.25 kg Resources User Manual Datasheet FAQs What roof profile is this anchor designed for? The SKYLOTEC Surface Mount Fall Arrest Anchor is specially designed for trapezoidal steel sheet profiles. What is this anchor used for? It is used as a single anchorage point for PPE and as a substructure for cable systems. Is this anchor certified? Yes. It is certified in accordance with AS/NZS 5532:2013. What is the maximum number of persons? The maximum number of persons is 1. What material is the anchor made from? The anchor is made from stainless steel. What type of anchor point is it? It is a stationary anchor point. What mounting base is it designed for? The mounting base type is trapezoidal sheet metal. How is the anchor mounted? The mounting type is sheet metal screws and rivets. Is the support supplied ready for installation? Yes. The pre-assembled swivel support is supplied ready for installation with sheet metal screws and bulb-type rivets. Can this anchor be used for rope access technique? No. The product information lists rope access technique as No. Can this anchor be used in SEAL PAC? No. The product information lists usable in SEAL PAC as No. What is the listed maximum lifetime? The listed maximum lifetime is 15 years. What temperature range is listed for this anchor? The listed minimum temperature is -20 °C and the listed maximum temperature is 80 °C. Can this anchor be used for lifting or tethering equipment? No. The user manual states that this anchor is not designed for lifting or tethering tools, machinery or equipment. Who should install this anchor? The user manual states that the system must only be installed by qualified individuals trained in the proper selection, use and maintenance of fall arrest systems, and who hold a valid SKYLOTEC installer certification. How often does the anchor need inspection or recertification? The user manual states that inspection and recertification of fall anchors and equipment is required at least every 12 months by a competent person in accordance with manufacturer specifications and AS/NZS 1891.4:2009 Section 9.