Receiver Hitch Winch Mount | Electric Planetary 6K to 20K

The Receiver Hitch Winch Mount is a portable mounting platform for the Pierce electric planetary recovery winch line — predrilled to fit the PS6000, PS9000, PS12000, and PS20000. Slide it into any 2 in × 2 in Class III or Class IV receiver hitch and turn any vehicle with a hitch into a recovery rig in minutes. When does a receiver hitch mount make more sense than a permanent winch frame? Three cases. You don't want to dedicate a single vehicle to the winch — pull the mount out when you're done, leaving the truck or trailer ready for other jobs. You move the same winch between multiple vehicles. Or you don't want to drill or weld a permanent winch frame onto a truck and would rather use the existing receiver hitch. 2 in × 2 in receiver hitch mount — requires Class III or Class IV receiver Accepts a 5/8 in hitch pin (sold separately) — 0.688 in receiver pin hole Predrilled mounting holes for PS6000, PS9000, PS12000, and PS20000 electric planetary winches Roller guide compatible — adapter plate included for PS6000; 9K, 12K, and 20K mount directly Fast 8-bolt handle assembly Laser-cut mounting holes for precision fit Steel construction Made in Texas For the winches this mount holds, see the 6,000 lb Recovery Winch, 9,000 lb Recovery Winch, 12,000 lb Recovery Winch, and 20,000 lb Recovery Winch. For a roller guide compatible with this mount, see the Roller Guide for 10,000 lb Winch. ⚠️ Class III or Class IV receiver hitch required. Class I and II receivers are not rated for the pulling forces electric planetary recovery winches generate. Verify the receiver is rated for the load before each pull. ⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.