Solar Motion Sensor Lights Australia | 122 LED Outdoor Security Light

Automatic solar lighting for outdoor areas 122 LED Solar Motion Sensor Lights Add automatic solar-powered lighting to walls, fences, patios, pathways and backyard areas. With 122 LEDs, adjustable solar panel and light head, four operating modes and motion detection, these outdoor lights provide flexible lighting without mains wiring. 122 LEDs 3–8m Motion Detection 4 Lighting Modes IP65 Weatherproof 180° Adjustable Practical outdoor lighting Why Choose These Solar Motion Sensor Lights? 122 LED design: provides broad outdoor illumination for walls, paths, fences and backyard areas. Motion detection: detects movement from approximately 3–8 metres away. Four operating modes: choose the lighting behaviour that suits your outdoor space. 180° adjustable design: adjust the solar panel and light head for better sunlight exposure and lighting direction. IP65 weatherproof: designed for normal outdoor exposure including rain and dust. No mains wiring: powered by solar energy with wall and pole mounting options. Choose how your light operates 4 Lighting Modes Mode 1 — Motion + 100% Activates at full brightness when movement is detected at night, then switches off approximately 20 seconds after movement stops. Mode 2 — Motion + 30% Motion-activated lighting with a lower brightness setting, switching off approximately 20 seconds after movement stops. Mode 3 — Constant Light Provides continuous lighting after dark while sufficient battery charge is available. Mode 4 — SOS Select the SOS lighting mode when a flashing light signal is required. Automatic motion detection 3–8 Metre Motion Sensing Range The built-in sensor is designed to detect movement from approximately 3 to 8 metres away, depending on installation conditions and the direction of movement. In motion-activated modes, the light responds automatically after movement is detected and remains active for approximately 20 seconds. Useful around: entrances, side paths, fences, garages, patios and backyard access areas where automatic lighting is preferred. Position it where you need it 180° Adjustable Solar Panel & Light Head Both the solar panel and light head can be adjusted up to approximately 180 degrees, allowing you to optimise the solar charging position and direct the light towards the required area. Adjust the Solar Panel Angle the panel towards available sunlight to help improve daytime solar charging. Adjust the Light Direction Aim the light towards a pathway, wall, fence, entrance or other outdoor area requiring illumination. Solar powered Approx. 6–8 Hours Charging The 5.5V / 1.6W monocrystalline solar panel charges the built-in 3.7V 2200mAh battery during daylight. Under suitable sunlight conditions, charging takes approximately 6–8 hours. For best charging performance, position the solar panel where it can receive good direct sunlight and avoid heavy shade from trees, roofs or nearby structures. Night-time performance Up to Approximately 8–12 Hours of Lighting When fully charged, the built-in 2200mAh battery can provide approximately 8–12 hours of operation under suitable conditions. Actual operating time depends on solar exposure, weather, selected lighting mode and how frequently the motion sensor is activated. Designed for outdoor use IP65 Weatherproof Protection The ABS and PC housing carries an IP65 weatherproof rating and is designed for everyday outdoor exposure including rain and dust. This makes the light suitable for exterior walls, fences, patios, pathways and other outdoor areas around Australian homes. Flexible installation Wall Mount or Pole Mount Wall Mount Install the light on a suitable exterior wall using the included mounting screws. Pole Mount The light can also be attached to a suitable pole using the included ties. Multiple outdoor applications Where Can Solar Motion Sensor Lights Be Used? Backyards Add automatic lighting to garden and backyard areas without running power cables. Fences & Walls Mount along suitable exterior walls or fences for directional outdoor lighting. Paths & Entrances Useful around side access areas, entrances and outdoor paths. Patios Add solar-powered illumination around patios and outdoor living areas. Garage Areas Motion sensing makes the light useful around garage entrances and access areas. Pole Installation Pole mounting provides another option where a suitable wall is unavailable. Solar Motion Sensor Light Specifications Product Type Solar Motion Sensor Outdoor Light LED Quantity 122 LEDs Solar Panel 5.5V / 1.6W Monocrystalline Silicon Battery 3.7V / 2200mAh Colour Temperature 6500K Cold White Motion Detection Distance Approx. 3–8 metres Motion Light Duration Approx. 20 seconds Lighting Modes 4 Modes Adjustability Up to 180° Solar Panel & Light Head Material ABS + PC Weather Protection IP65 Charging Time Approx. 6–8 hours in suitable sunlight Operating Time Approx. 8–12 hours when fully charged Installation Wall Mount / Pole Mount Power Source Solar Powered Solar Motion Sensor Lights Australia Solar motion sensor lights are a practical option for Australian outdoor areas where automatic lighting is needed without installing new electrical wiring. Unlike basic dusk-to-dawn garden lights, motion sensor solar lights can respond when movement is detected. This makes them useful around entrances, side access areas, paths, fences, patios and garages. An adjustable solar panel can also be useful where the best direction for sunlight is different from the direction in which the light needs to shine. This model allows both the solar panel and light head to be repositioned. Product questions Frequently Asked Questions What should I look for in solar motion sensor lights in Australia? Consider motion detection range, weather protection, solar panel position, battery capacity, lighting modes and installation options. This model offers a 3–8 metre sensing range, IP65 protection, four modes and an adjustable solar panel and light head. How far can the motion sensor detect movement? The specified sensing range is approximately 3–8 metres. Actual performance can vary depending on installation position, environment and direction of movement. How long does the light stay on after detecting movement? In the motion-activated modes, the specified sensing light duration is approximately 20 seconds after movement stops. What are the four lighting modes? The light offers full-brightness motion activation, lower-brightness motion activation, constant lighting and SOS mode. Do these solar motion sensor lights need an electrician? No mains electrical connection is required. The lights are solar powered and can be installed using the supplied wall-mounting or pole-mounting accessories. Can I adjust the solar panel? Yes. The solar panel and light head can be adjusted up to approximately 180 degrees, allowing you to optimise sunlight exposure and lighting direction. How long do the lights take to charge? Charging time is approximately 6–8 hours under suitable sunlight conditions. How long will the light operate at night? When fully charged, operating time is approximately 8–12 hours under suitable conditions. Actual runtime depends on sunlight, weather, selected mode and motion activity. Are these solar motion sensor lights waterproof? The housing carries an IP65 weatherproof rating and is designed for normal outdoor exposure including rain and dust. The light should not be installed where it may remain submerged in water. Can I mount the light on a pole? Yes. In addition to wall mounting, the light can be attached to a suitable pole using the supplied ties. Automatic Outdoor Lighting — No Wiring Needed 122 LEDs, 3–8m motion detection, four lighting modes and an adjustable solar panel make it easy to add solar-powered lighting around walls, fences, paths, patios and backyard areas.