Warmup Tempo Thermostat

Warmup Tempo Thermostat The Warmup Tempo Thermostat is an easy-to-use digital programmable thermostat designed to provide precise control of electric and hydronic underfloor heating systems. Combining a clear digital display with intuitive dial and slider controls, the Tempo allows heating schedules to be programmed quickly and easily, helping provide a comfortable room temperature when required while avoiding unnecessary heating. Its Proportional Adaptive Function learns how long the underfloor heating system takes to warm the room and automatically adjusts when the heating starts, helping the room reach the selected temperature at the programmed time. The Tempo is compatible with all Warmup electric underfloor heating systems and is available in Porcelain White and Piano Black finishes. Key Features Digital programmable thermostat - Provides straightforward control of your underfloor heating system. Proportional Adaptive Function - Learns the time required to heat the room and adjusts the heating start time accordingly. Clear digital display - Shows the current temperature and programmed heating information. Easy dial and slider controls - Allows settings and programmes to be adjusted quickly and intuitively. Flexible programming - Supports 7-day, 1-day and 5/2-day programming options. Floor and air sensing - Can monitor either floor or air temperature depending on the installation and configuration. Compatible with Warmup heating systems - Suitable for Warmup electric and hydronic underfloor heating systems. 16A maximum load - Supports heating loads up to 16A / 3,680W. Battery backup - Provides approximately three months of backup using the supplied CR2032 battery. Two finish options - Available in Porcelain White and Piano Black. Compact wall-mounted design - Measures just 90 x 113 x 23mm when flush fitted. BEAB approved - Designed and tested to meet recognised electrical safety requirements. 3-year warranty - Supplied with a 3-year warranty, with the option to upgrade to a Lifetime Warranty. Intelligent Heating Control The Warmup Tempo incorporates a Proportional Adaptive Function designed to make underfloor heating control more efficient and convenient. Rather than simply switching the heating on at a fixed time, the thermostat learns how long the room takes to reach the desired temperature and can activate the heating earlier where necessary. This helps the room reach the programmed temperature at the required time without relying on excessive heating periods. The thermostat can therefore be programmed around your daily routine, providing warmth when required and reducing unnecessary operation when heating is not needed. Programming Options The Tempo provides several programming options to suit different heating routines. Users can select 7-day, 1-day or 5/2-day programming, allowing heating schedules to be configured for individual days or groups of weekdays and weekends. The thermostat also provides four operating modes: Program Mode - Runs the programmed heating schedule. Manual Mode - Maintains a selected temperature. Frost Protection Mode - Prevents the temperature from falling below approximately 5°C. Standby Mode - Switches the heating system to standby. Design and Display The Tempo features a contemporary design with a straightforward interface intended to make programming accessible without complicated menus. A rotary dial is used to adjust settings, while sliders provide quick access to the thermostat's programming and operating modes. The digital display measures 45 x 50mm, providing a clear view of the current temperature and programmed heating information. The thermostat is available in Porcelain White or Piano Black, allowing it to complement a range of interior styles. Technical Information Product: Warmup Tempo Programmable Thermostat Application: Underfloor heating control Compatibility: Electric and hydronic underfloor heating systems Input Voltage: 230V ±15% at 50Hz Maximum Load: 16A / 3,680W Dimensions: 90 x 113 x 23mm (H x W x D) Display Size: 45 x 50mm Sensors: Air and floor Sensor Type: NTC 10K Floor Sensor Length: 3m Maximum Sensor Extension: Up to 50m Programming: 7-day, 1-day and 5/2-day Battery Backup: Approximately 3 months Battery: CR2032, supplied Installation Depth: 35mm back box IP Rating: IP20 Maximum Ambient Temperature: 40°C Er-P Class: IV Approvals: BEAB Compliance: CE and UKCA marked Finish Options: Porcelain White and Piano Black Warranty: 3 years, with option to upgrade to Lifetime Warranty Installation The Warmup Tempo is designed for wall-mounted installation using a 35mm back box. The supplied floor sensor is 3m long and can be extended up to 50m where required, providing flexibility when positioning the thermostat in relation to the heated floor area. As the Tempo operates at mains voltage and controls heating loads up to 16A, electrical installation and connection should be carried out by a suitably qualified electrician in accordance with current UK wiring regulations and the Warmup installation instructions. Ideal Applications The Warmup Tempo Thermostat is suitable for controlling underfloor heating in a variety of domestic and commercial spaces, including: Living rooms Kitchens Bedrooms Hallways Conservatories Dining areas Offices Other heated rooms Warmup states that the Tempo is suitable for use throughout the home with the exception of bathrooms, where an appropriately rated thermostat should be selected. What's Included Warmup Tempo Programmable Thermostat NTC 10K floor sensor CR2032 backup battery Why Choose the Warmup Tempo? The Warmup Tempo Thermostat provides straightforward, programmable control for underfloor heating without the complexity of a smart thermostat. Its clear digital display, intuitive controls and Proportional Adaptive Function make it easy to create heating schedules suited to your daily routine. With support for 16A / 3,680W loads, floor and air sensing, multiple programming options and a compact 90 x 113 x 23mm design, the Tempo provides a practical control solution for Warmup underfloor heating systems.