YZF-R15 V4 Winglets

YAMAHA · YZF-R15 V4 · 2022–2026YZF-R15 V4 WingletsNo Drilling RequiredShaped around the compact fairing of the 2022–2026 Yamaha YZF-R15 V4, the HMN-R15V4 TS adds a more defined aerodynamic presence while maintaining the motorcycle’s lightweight supersport character. Developed around the original bodywork, the two-piece design follows the factory fairing geometry for a clean, integrated fit.Technical Information Series: HMN Series Model: HMN-R15V4 TS Fitment: Yamaha YZF-R15 V4 (2022–2026) Configuration: Two-piece set, left and right Material: Carbon Fiber Reinforced Thermoplastic Finish: Fine-textured Black Surface Mounting: Pre-applied 3M VHB adhesive Permanent Modification: Not required Mounting InstructionsThe HMN mounting system features pre-applied 3M VHB adhesive and requires no drilling or permanent modification to the fairing. Test-fit both winglets and confirm the final mounting position before removing the adhesive liner. Make sure the mounting surfaces are clean, completely dry, and free from wax, ceramic coating, silicone residue, oil, or other detailing products. Install in a warm, dry environment and apply firm, even pressure across the complete bonding surface. Leave the motorcycle indoors and undisturbed for at least 24 hours after installation. Avoid washing the motorcycle or sustained high-speed riding for 72 hours while the adhesive reaches its intended bond strength. Follow the supplied installation guide and use the included adhesion promoter as directed. Care: Avoid direct pressure washing around the adhesive edges. Do not use solvents or strong acidic or alkaline cleaning products on the winglets.In the Box Left winglet with pre-applied 3M VHB adhesive × 1 Right winglet with pre-applied 3M VHB adhesive × 1 3M adhesion promoter Surface cleaning wipes Installation guide Fitment NoticeDesigned for the Yamaha YZF-R15 V4 (2022–2026) with original OEM fairings.Fitment with aftermarket, replacement, repaired, or modified bodywork may vary. If you are unsure about compatibility, contact HARMONIZE with your motorcycle model year and clear photos of the relevant fairing area before ordering.