SSX23/303/TM MK23 HPA Adapter - Plug and Play

Introducing the MK23 M-Series adapters. We've fully printed the gas magazine for this adapter, maintaining high air volume, adding modularity, improving ease of assembly, and reducing weight massively. The way we see it, this is the ultimate solution to HPA'ing your MK23 (if you don't want to run shotgun shells that is!) This is everything you need to HPA your MK23 Two small grub screws are fitted to the adapters mag catch area, you can loosen these to reduce the distance from adapter to nozzle, improving air-seal and FPS. If you want to get higher FPS, run a tighter barrel, a higher flow nozzle (SSX23/303 users), or a stronger hammer spring. For Clone/SSX Users We include small rectangular gas router shims which can be placed under your feedlips to move the gas router up higher towards the nozzle to improve fps. To remove your feed lips, first remove the two screws at the front of the lips, and then remove the pin at the rear of the lips. MK23 to M4 Magazine HPA Adapter Compatible with a wide range of M4 AEG magazines, we recommend you use PTS EPM1 or EPM1S. Your adapter will come with a number of shims that can be used to ensure snug fitment of your M4 magazine. MK23 to MP5 Magazine HPA Adapter Compatible with all CYMA MP5 Mid Cap magazines. CNC Feed Tube and Release. For a MK23, the short 65 round magazines look great! They are available in the magazine section of the website MK23 to Drum HPA Adapter Compatible with JG VZ61 drums, and TM MP5 / VZ61 High Cycle Drums 400 round drums. Drums sold separately on the website here. DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE