215 X 1/2" with 1/4-20 X 5/8" Arc Collar Stud Mild Steel with C Ferrules

The collar on these partially threaded drawn arc weld studs acts as a spacer between the workpiece and parts installed on the studs after they have been welded to the workpiece. A short base section is melted off during the welding process. Sometimes called Partially Threaded Drawn Arc Weld Studs with Collar, the studs form strong, vibration-resistant welds that provide a tight seal against water, oil, air, or gas leaks at the weld point. Material: Low Carbon Steel Length: Length is before weld. Will be approximately 1/8" shorter after welding. Thread: Standard UNC2A Ferrules: Includes required ceramic ferrules (insulators) (Other types of ferrules available on request) Mechanical Properties (as cold drawn): Tensile: 61,000 psi min Yield Strength: 49,000 psi min Elongation (% in 2 in.): 17% min. Elongation (% in 5x dia.): 14% min Reduction in Area: 50% Min Spec Sheet Download