BMW 135i/335i/X1 Catless Heat Shield Downpipe 2010-2015 (N55 E8X/E9X/E84) | WSTN Performance

More flow, more sound and more power from the N55 straight six. WSTN Performance catless downpipe for the BMW 135i (E82 and E88), 335i (E90, E91, E92 and E93) and X1 xDrive35i (E84), all powered by the N55 3.0 litre turbocharged straight six. It replaces the restrictive factory downpipe with a free-flowing stainless steel downpipe, heat shielded as standard. The result is more flow, a louder and deeper straight six note, more power with quicker turbo response, and a cooler engine bay. Select your car below, enter your VIN, and we double check fitment before your order ships. Why Upgrade? ✓ More Flow: A free-flowing stainless steel downpipe replaces the restrictive factory section behind the turbo, splitting into two pipes that feed the dual mid pipe, so there is nothing in the way of the exhaust gas leaving the turbo. ✓ More Sound: A deeper, louder straight six note when you are on the throttle and more character when you lift off. The sound the factory downpipe holds back. ✓ More Power: Less restriction right behind the turbo means it spools quicker and the N55 makes more power through the rev range. ✓ Less Heat: Heat shielding fitted as standard keeps the heat inside the pipe, so your engine bay runs cooler than it would without it. ✓ Perfect Fit: Use the car selector on this page to confirm your model and year, and enter your VIN so we can double check fitment. If entered, your VIN is submitted with your order at checkout. Key Features & Specs Material: T304 stainless steel Heat shielding: Fitted as standard along the pipe body, from the split to the V-band end Sensor provision: Oxygen sensor bung on the turbo-side pipe. OPF vehicles receive the necessary sensor provisions as well. Configuration: Catless Fitment & Compatibility ✓ BMW 135i Coupe (E82) / 2010-2013 / N55 3.0L ✓ BMW 135i Convertible (E88) / 2010-2013 / N55 3.0L ✓ BMW 335i/335i xDrive Sedan (E90) / 2010-2011 / N55 3.0L ✓ BMW 335i/335i xDrive Touring (E91) / 2010-2012 / N55 3.0L ✓ BMW 335i/335i xDrive Coupe (E92) / 2010-2013 / N55 3.0L ✓ BMW 335i Convertible (E93) / 2010-2013 / N55 3.0L ✓ BMW X1 xDrive35i (E84) / 2012-2015 / N55 3.0L Check it fits your car Use the fitment selector on this page to confirm your exact make, model, and year before ordering. What's In the Box ✓ 1 x WSTN Performance 135i/335i/X1 N55 catless downpipe, one welded assembly (V-band turbo end splitting into two pipes, each with a 2-bolt flange) Installation ✓ Replaces the factory downpipe between the turbo and the dual mid pipe ✓ V-band connection at the turbo, with a 2-bolt flange on each of the two pipes at the mid pipe end ✓ Professional installation recommended ✓ Delivers the most when paired with a tune Heat Shielding ✓ Cooler engine bay: Heat shielding stops the heat coming off the pipe from spreading into the bay, so your engine bay runs cooler than it would without it. ✓ Less heat soak: Hoses, wiring, sensors and the rubber and plastic parts near the exhaust take on less heat, which helps them last. ✓ Factory approach: The same principle used on factory exhaust systems, a barrier between hot metal and the rest of the bay. ✓ Heat stays in the pipe: Keeping heat in the exhaust stream instead of radiating it out supports flow through the pipe. Why WSTN Performance? ✓ Fitment checked twice: Use the car selector to confirm your model and year and enter your VIN. We check it again before your order ships. ✓ Quality you know: Built to the same standard as the big brands you already know. ✓ Australian based support: Real people, real enthusiasts. ✓ Worldwide delivery, correct fitment everywhere: Fitments differ between markets and we check for this. Our images may not always show the international version, but what you receive will be the correct fitment for your car. ✓ 1 year warranty: Every product is covered by our 1 year WSTN Performance warranty. ✓ Run by car enthusiasts: We are excited to see our parts on your car. Warranty / Shipping DISCLAIMER WSTN Performance components are designed for track and competition use only. To protect your build and ensure a perfect finish, we recommend professional installation by a certified specialist/workshop. It is the buyer's responsibility to ensure modifications comply with local regulations. WARRANTY We stand behind every product we sell. All WSTN Performance products carry a 1 year WSTN Performance warranty as standard. This covers any manufacturing defects, giving you total peace of mind that your upgrade is built to last. View our full Warranty policy page here. SHIPPING We offer tracked worldwide shipping on our entire catalogue. If your product is made to order, the product page shows how long it takes to manufacture, and at checkout you will see how many days delivery takes after manufacturing. If it is in stock, the checkout page will show you when it will arrive. View our full Shipping policy page here. RETURNS We offer returns on all products if items are damaged or there is something wrong. If we ever make a mistake, we'll cover the return shipping to make it right. View our full Return policy page here. SUPPORT Need a hand with fitment, shipping, or a return? Our Perth-based team is here to help you get your build perfect. Email: contact@wstnperformance.com Sound clip Coming soon.