Fox - Air Sleeve Maintenance Seal Kits

FOX - AIR SLEEVE MAINTENACE SEAL KITS We reccomend performing an air can service every 50 hours. Using these kits are necessary for you Fox rear shocks and will ensure you are getting the best performance out of it How to Find the Correct Replacement Part for a Fox Suspension Fork Getting the right part for your Fox fork depends on identifying the exact model, because many Fox parts are not interchangeable. The easiest way to do this is by finding the 4 digit ID code on the fork. 1. Find Your Fox ID Code Look on the back of the lower leg of your fork for a 4 digit code (examples: C372, DH6P). If you don’t see one, check for an 11 digit serial number stamped on the underside of the steerer tube, especially on older forks.(You may need to clean the area or use a flashlight). 2. Use the Fox Help Center Go to tech.ridefox.com/bike. Type your 4 digit code or serial number into the search bar. This will show your fork’s model, year, travel, and the official Parts & Drawings for your fork/shock. 3. Find the Correct Part In the Parts & Drawings section, look for the exploded diagram of your fork/shock. Use the exact part numbers listed for your fork’s year and model. Make sure you know your fork’s stanchion size (32/34/36/38/40mm). 4. If You Can’t Find a Code Try to identify the model,year and spec of the fork. Search the Parts & Drawings section, look for the exploded diagram of your fork/shock. BIKE TECH HELP CENTRE Bike Tech Help Center | FOX Parts & Drawings | Bike Tech Help Center | FOX