Bollard Surface Mounted 76mm Yellow

Galvanised Core, Safety Yellow Finish – Bollard Surface Mounted 76mm Yellow The Enforcer 76mm Bollard provides high-visibility hazard marking, vehicle access control, and asset protection in areas where drivers and forklift operators need to identify barriers instantly. Hot dip galvanised then powder coated safety yellow over 3mm steel pipe, with a 25mm red reflective band, it bolts straight to concrete at 900mm high — the standard choice for car parks, warehouses and traffic zones. Why Choose This Bollard? Safety yellow powder coat gives immediate daytime visibility, the recognised warning colour on Australian sites Hot dip galvanised beneath the powder coat, so a scratch or chip does not start rust underneath 3mm wall thickness delivers solid impact resistance against trolleys, forklifts and low-speed vehicle contact 25mm red reflective band maintains visibility after dark and in unlit car parks Welded stretched cap seals the pipe against water ingress, with no plastic insert to crack or go missing Compact 150mm base plate bolts to concrete through 14mm holes, taking up minimal walkway space No excavation or core drilling required, so retrofits and occupied sites stay operational At 5.5kg, one person can position and install it without lifting equipment Where Can This Bollard Be Used? Car parks, driveways and vehicle entry points Warehouses, loading docks and forklift traffic zones Factories, machinery bays and industrial yards Retail storefronts and commercial entrances Public spaces, footpaths and pedestrian walkways Secure Your Site with Enforcer Choose the Bollard Surface Mounted 76mm Yellow to protect your people, stock and infrastructure without invasive works. Backed by Enforcer — an Australian, Melbourne-based specialist in safety infrastructure — with stock warehoused in Melbourne and Perth for fast nationwide delivery. Explore the Surface Mounted Bollards range or Request a Quote today. Learn More About Bollards How Bollards Create Traffic Safety A Guide To Bollard Spacing and Installation Bollard Installation Cost - How Much Does It Cost to Install a Bollard? More About This Product Is it galvanised as well as painted? The steel is hot dip galvanised first, then powder coated safety yellow. That two-layer system is what separates it from bollards that are simply painted, where a single chip lets rust take hold. Should I choose yellow or galvanised? Yellow gives the strongest daytime visual warning and suits traffic zones and forklift areas. Plain galvanised suits wash bays, coastal sites and locations where appearance matters less than corrosion resistance. Both share the same pipe, height and base plate. How is the bollard installed? The welded 150mm base plate bolts directly to an existing concrete slab through four 14mm holes using concrete screw bolts. No excavation or core drilling, and one person can complete the install. Is the bollard removable? This is a fixed bollard for permanent installation, though it can be unbolted and relocated if your layout changes. For daily vehicle access, choose a removable keylock bollard. How much impact will it take? The 3mm wall and 76mm diameter suit trolleys, forklifts and low-speed vehicle contact. Where heavy vehicle impact is a genuine risk, step up to a 90mm, 114mm or 140mm bollard. Will the yellow finish fade outdoors? Powder coating is baked on rather than sprayed as a paint film, giving strong resistance to UV fade, chipping and general wear in Australian conditions.