IV3-L5M Keyence Infrared Ring Light - IV3 Series Illumination Unit

IV3-L5M Infrared Ring Light for Keyence IV3 Smart Camera Key Technical Specifications Brand: Keyence Model: IV3-L5M Category: AI imaging illumination unit (ring light) Compatible sensor: IV3-500MA Illumination type: Infrared LED Supply voltage: Power supplied by the connected sensor Operating temperature: 0 to +50°C (no freezing) Relative humidity: 35 to 85% RH (no condensation) Protection rating: IP67 (valid only when mounted to a compatible sensor; excludes use with polarizing filter OP-88644/OP-88645/OP-88646/OP-88647) Material: Case: aluminum die-casting; front cover: acrylic Weight: Approx. 195 g Built-in ports / protocols: None Installation Guide Mount the IV3-L5M ring light onto the IV3-500MA sensor before powering the system. Confirm that the mounting surface is clean and that the ring light sits flush against the sensor front. Route the connection through the sensor interface; the sensor supplies all required power. Do not attach a polarizing filter if you need the full IP67 protection rating. Check the ambient temperature stays between 0 and +50°C during operation. Keep humidity within 35 to 85% RH and avoid condensation on the acrylic front cover. Environmental Resistance and Reliability The IP67 rating protects against dust ingress and short water immersion when mounted correctly. The aluminum die-cast case resists mechanical shock in typical inspection cells. Infrared LED output supports stable imaging in low-light inspection setups. The unit operates reliably from 0 to +50°C without freezing conditions. Packing List 1 × Keyence IV3-L5M infrared ring light 1 × Protective packaging Shipping via FedEx, UPS, or DHL Shipping and Support We keep this item in stock and dispatch within 5 days. We ship with FedEx, UPS, and DHL for global delivery. We accept returns within 30 days of delivery. All units are brand new and original. FAQ Q: Which sensor does the IV3-L5M work with? A: The IV3-L5M works with the IV3-500MA sensor from the Keyence IV3 Series. Q: Does the ring light need a separate power supply? A: No. The connected sensor supplies power, so no extra cable or adapter is needed. Q: What is the operating temperature range? A: The unit runs from 0 to +50°C with no freezing and stays within 35 to 85% RH. Q: Is the IP67 rating always active? A: The IP67 rating applies only when you mount the unit to a compatible sensor and do not use a polarizing filter. Q: How much does the unit weigh? A: The ring light weighs approximately 195 g. Q: Do you have this item in stock and how fast do you ship? A: Yes, we have stock and ship within 5 days via FedEx, UPS, or DHL. Q: What is your return policy? A: We support returns within 30 days. © 2026 NexAuto Technology Limited. All rights reserved. Original Source: https://www.nex-auto.com/ Contact: sales@nex-auto.com Phone: +86 153 9242 9628