EXT ARIA V2

Getting the right shock starts with your bike, your riding and the feel you’re looking for. At ProFlow Suspension, we can help you check EXT ARIA V2 fitment and understand how its adjustments suit your setup. The AS3 air spring lets you adjust support and progression through two positive air chambers, while hydraulic bottom-out control manages the end of the stroke. Choose the standard ARIA V2 for trail, enduro and e-bikes, or the dedicated DH version for downhill and freeride. From our Queenstown workshop, we provide specialist setup advice and ongoing EXT suspension servicing for riders throughout New Zealand. AS3: EXT’S PATENTED AIR SPRING TECHNOLOGY The ARIA V2 uses EXT’s patented AS3 system, combining two independently adjustable positive air chambers, separated by just two seals, with a large, self-equalising negative chamber. Adjusting the + and ++ chambers lets you fine-tune how much support the shock provides and where that support builds through the travel. The large negative chamber keeps the initial stroke sensitive and comfortable. Positive (+) chamber: Sets the dynamic sag position and controls how the shock -responds through roughly the first 60% of travel. - Positive (++) chamber: Fine-tunes how support builds through the travel. Higher pressure adds mid- and end-stroke support, while lower pressure gives a more linear feel. - No tokens needed: Adjust progression through the ++ air chamber without plastic volume spacers. Fine-tune mid-stroke support and bottom-out resistance without an abrupt ramp-up at the end of travel. - WHAT’S NEW IN THE ARIA V2 AIR SPRING Redesigned air transfer: A revised bypass between the positive and negative chambers smooths the transition through the stroke, removing unwanted mid-stroke feedback. Optimised airflow: Revised airflow along the positive chamber’s inner tube keeps the air spring response predictable, even during rapid compressions and high-speed impacts. REFINED CHASSIS & HYDRAULIC CONTROL Reduced friction: Updated seal profiles and materials reduce friction for improved sensitivity and consistent performance. The upper bushing now sits internally, in direct contact with the damping oil, for smoother movement throughout the travel. More compact layout: A new vertical piggyback orientation and smaller valve block improve frame clearance and open up more fitting options. Hydraulic Bottom-Out Control (HBC): A secondary piston adds hydraulic support through the final 15% of the stroke, controlling bottom-out without changing the air spring’s behaviour. ARIA V2 DH: BUILT FOR DOWNHILL & FREERIDE The ARIA V2 DH brings EXT’s air shock platform to downhill and freeride, with a dedicated configuration for longer shock strokes and gravity riding. Dedicated tune: Tuned specifically for the demands of downhill and freeride, with settings tailored to longer shock strokes. More frame clearance: Removing the LOK 2.0 climb lever creates more room for fitting the shock to DH frames. DH-specific bottom-out control: A redesigned Hydraulic Bottom-Out Control system delivers 20% more force at the end of the stroke to help manage heavy impacts and big landings. RIDEMASTER: GET YOUR SETUP DIALED The ARIA V2 integrates with RideMaster, EXT’s web-based suspension setup platform, to give you a starting point tailored to your bike and riding. Enter your bike and rider weight, suspension travel, shock stroke, terrain and riding level to receive recommended air pressures, sag, damping and HBC settings in minutes. EXT is developing further RideMaster applications to support the wider product range. EXT FIVE PLUS: UP TO 5 YEARS OF WARRANTY COVER The ARIA V2 and ARIA V2 DH are eligible for EXT’s FIVE PLUS warranty extension programme, adding three years of cover to the standard two-year warranty. Five years of total cover, subject to the programme’s terms and conditions. RETHINKING AIR SUSPENSION The EXT ARIA V2 combines coil-like sensitivity with the adjustability of an air spring. Its patented AS3 technology lets you fine-tune initial sensitivity, mid-stroke support and end-stroke progression to suit your bike and riding style. Sensitive on small bumps, supported through the travel and controlled on bigger hits, with the flexibility to get the feel you’re looking for. TECHNICAL SPECIFICATIONS ARIA V2: TRAIL / ENDURO / E-BIKE Patented AS3 dual positive air chamber technology Monotube design Adjustable high- and low-speed compression Adjustable rebound Independent, customisable LOK 2.0 lockout circuit Adjustable Hydraulic Bottom-Out Control (HBC) V4-series compression valve 14 mm chromoly steel shaft EXT EV2S fluid High-volume bladder reservoir pressurised to 55 psi Weight: 622 g in 210 × 55 mm Available sizes Eye-to-eye length × stroke, in millimetres. Mount Eye-to-eye length Available strokes Standard 210 mm 47.5 / 50 / 52.5 / 55 mm Standard 230 mm 57.5 / 60 / 62.5 / 65 mm Standard 250 mm 67.5 / 70 / 72.5 / 75 mm Trunnion 185 mm 47.5 / 50 / 52.5 / 55 mm Trunnion 205 mm 57.5 / 60 / 62.5 / 65 mm Trunnion 225 mm 67.5 / 70 / 72.5 / 75 mm ARIA V2 DH: DOWNHILL / FREERIDE Patented AS3 dual positive air chamber technology Monotube design Adjustable high- and low-speed compression Adjustable rebound V4-series compression valve 14 mm chromoly steel shaft EXT EV2S fluid High-volume bladder reservoir pressurised to 55 psi DH-specific Hydraulic Bottom-Out Control with 20% more end-stroke force Dedicated downhill tune No LOK 2.0 lever for improved frame clearance Weight: 667 g in 250 × 75 mm Available sizes Eye-to-eye length × stroke, in millimetres. Mount Eye-to-eye length Available strokes Standard 230 mm 57.5 / 60 / 62.5 / 65 mm Standard 250 mm 67.5 / 70 / 72.5 / 75 mm Trunnion 205 mm 57.5 / 60 / 62.5 / 65 mm Trunnion 225 mm 67.5 / 70 / 72.5 / 75 mm