HITEK PPF Core

HITEK PPF CORE – Gloss Clear 8-Year Warranty | 7.5 mil Paint Protection Film | HITEK PPF CORE Gloss HITEK PPF CORE Gloss is a professional-grade clear paint protection film engineered to protect automotive finishes from everyday road wear while maintaining a deep, high-gloss appearance. Built with a 7.5 mil finished construction and 6.0 mil TPU base film, CORE Gloss combines excellent flexibility with a hydrophilic surface coating designed to resist staining, simplify maintenance, and provide self-healing performance against light surface scratches. With 350% elongation, CORE Gloss conforms smoothly around curves, bumpers, mirrors, fenders, and other complex body panels while maintaining strong film integrity. Key Features 7.5 mil finished Paint Protection Film 6.0 mil TPU base film Hydrophilic surface coating High-gloss 145 GU finish Self-healing surface 350% elongation 24 MPa tensile strength 60 kN/m tear strength Stone-impact tested Scratch resistant Abrasion resistant Organic-solvent resistant Rain-spot resistant 3,000-hour QUV tested Xenon aging tested 8-Year HITEK Limited Warranty HITEK PPF CORE Gloss provides professional installers with a dependable clear PPF option that combines high gloss, flexibility, and everyday paint protection in one film. HITEK PPF CORE – Matte Clear 8-Year Warranty | 8.5 mil Matte Paint Protection Film | HITEK PPF CORE Matte HITEK PPF CORE Matte combines premium paint protection with a smooth satin-matte transformation. Manufactured with a high-performance TPU base film, CORE Matte is engineered to help protect OEM paint from stone chips, scratches, minor scuffs, door-edge contact, and everyday road wear while transforming the vehicle’s original gloss finish into a refined matte appearance. The 8.5 mil construction delivers excellent durability and installation flexibility, while 390% elongation and 75 kN/m tear strength allow the film to conform around complex automotive panels without sacrificing toughness. Key Features 8.5 mil TPU Paint Protection Film Satin-matte 22 GU finish 390% elongation 26 MPa tensile strength 75 kN/m tear strength 8.8 MPa 100% modulus Stone-impact tested Scratch resistant Organic-solvent resistant Rain-spot resistant Humid-heat aging resistant 1,000-hour QUV tested 8-Year HITEK Limited Warranty HITEK PPF CORE Matte gives installers the ability to protect the original paint while delivering a factory-style satin transformation in a single installation. HITEK PPF CORE 8-Year Limited Material Warranty HITEK warrants HITEK PPF CORE Gloss Clear and HITEK PPF CORE Matte Clear against qualifying defects in film materials for a period of eight (8) years from the original installation date, subject to the terms and exclusions below. Coverage Includes Film Integrity Protection against qualifying premature cracking, bubbling, delamination, or separation of the film layers resulting from a material defect. Adhesive Failure Protection against qualifying premature adhesive failure resulting from a defect in the film or adhesive system. Yellowing or Discoloration Protection against excessive or abnormal yellowing or discoloration caused by a covered material defect. Top-Coat Failure Protection against qualifying premature failure or separation of the film’s protective surface coating. Matte Finish — CORE Matte Only Protection against abnormal deterioration of the intended matte finish when caused by a covered material defect. Warranty Period 8 Years from the original installation date Coverage applies to the original purchaser and the original vehicle on which the film was installed. Warranty Remedy If HITEK determines that a valid covered material defect exists, HITEK may, at its discretion: Replace the defective film material, or Provide replacement HITEK film of comparable type and value. This is a limited material warranty. Unless specifically authorized by HITEK in writing, coverage does not include: Installation labor Film removal labor Reinstallation labor Paint correction Detailing Vehicle rental Loss of use Incidental or consequential expenses Any workmanship warranty provided by the installing dealer is separate from the HITEK material warranty. Warranty Conditions To qualify for coverage: Film must be professionally installed Proof of purchase must be provided Installation date must be documented Film must be properly maintained Product must be installed on a suitable automotive surface Photographs of the claimed defect may be required Installer and vehicle information may be required HITEK may request inspection of the film or a material sample Exclusions The warranty does not cover damage caused by: Improper installation Installation workmanship Accidents or collisions Rock impacts that physically damage the film Cuts, punctures, tears, or abrasion Vandalism Vehicle body repairs Improper removal Failure of the underlying paint or clear coat Repainted or unstable paint surfaces Rust or corrosion beneath the film Improper washing or detailing Abrasive polishing Incompatible chemicals or solvents Pressure-washer damage Environmental fallout Bird droppings, insects, tree sap, tar, or road chemicals left untreated Normal wear and tear Normal surface wear, minor scratches, stone impacts, and environmental contamination do not constitute manufacturing defects. Claim Process To submit a claim, provide HITEK with: Proof of purchase Installation date Vehicle information Installer information Clear photographs of the affected area Description of the issue Any additional information reasonably requested by HITEK HITEK will evaluate the claim and determine whether the condition qualifies for coverage.