Multifunctional Interior Coating Ultra Plus

Balanced Protection and Thermal Comfort for Everyday Interior Spaces Multifunctional Interior Coating Ultra Plus is a high-performance water-based interior coating combining antibacterial, anti-mold, and thermal properties. Created for a wide range of interior environments, Ultra Plus is suitable for residential, healthcare, hospitality, education, office, and general commercial spaces. Its multifunctional performance makes it a practical choice for projects where maintaining a cleaner interior environment and improving thermal comfort are important considerations. Ultra is designed to deliver a balance of performance and cost-effectiveness, making it well-suited for both residential and professional applications. Features: Enhanced-performance interior coating Antibacterial and Anti-mold performance Supports improved thermal comfort Designed for areas with higher thermal stress Suitable for environments with condensation risk Designed for spaces with continuous temperature fluctuations Specifications: Product: Multifunctional Interior Coating Ultra Plus Available Sizes: 1 Gallon / 5 Gallons Color: White (Munsell N 9.5) Recommended Coats: 2 or more Application Method: Brush, roller, or approved spray equipment Recoat Time: Approx. 2 hours at 68°F (20°C) At 50°F (10°C): Allow at least 4 hours before recoating Minimum Application Temperature: 41°F (5°C) Maximum Relative Humidity: 85% Recommended Environments: Residential and commercial interiors Manufactured in Japan by Aqua Kasei Co., Ltd. Care & Application Guide Apply to a clean, dry surface free from dust, grease, oil, loose paint, rust, mold, and other contaminants. Apply a suitable primer when required for the substrate. Stir thoroughly before use. Do not over-mix. Apply by brush, roller, or approved spray equipment. Apply two or more coats. Allow approximately 2 hours between coats at 68°F (20°C). At approximately 50°F (10°C), allow at least 4 hours before recoating. Do not apply below 41°F (5°C) or when relative humidity exceeds 85%. Provide adequate ventilation during application and drying. Clean tools and equipment with water before the coating dries. Store tightly closed in a cool, dry, well-ventilated place at 41–95°F (5–35°C). Protect from freezing, direct sunlight, and excessive heat.