Hitch Rig Carrier

Your off-road wheelchair was built to go places most wheelchairs can’t. The Hitch Rig Carrier makes getting there easier. Designed to haul your Rig wherever adventure calls, this hitch-mounted carrier lets you load up and hit the road without needing a dedicated trailer. Includes: Rig Carrier Anti-rattle hitch accessory ⅝” clevis hitch pin 4 straps for securing RIG to Carrier Additional Information: Carrier is built to transport the 2WD or 4WD RIG 2.0 The RIG is easily loaded using the throttle to drive up the ramps and onto the Carrier Carrier folds up when not in use Carrier weight: approx. 70 lbs Carrier is rated to carry maximum 250 lbs Compatible with a 2” hitch receiver only Designed to handle any terrain: road, gravel, mild offroading Not approved for use on RVs Assembly Required: The Carrier ships in 3 separate pieces. It will take between 30 - 60 minutes to assemble, and only requires standard hand tools. The Carrier can be assembled to load the RIG from the driver or passenger side of the vehicle. Before you Buy - Vehicle Compatibility: Ensure you have a 2” hitch receiver installed on your vehicle (a 2” hitch receiver measures 2 1/32” on the inside of the receiver) Ensure you have a Class II hitch receiver or higher – Class II receivers have a 350 lb max tongue weight rating Ensure your vehicle’s max tongue weight rating exceeds the weight of your RIG and Carrier (2WD weighs 150 lbs, 4WD weighs 200 lbs, Carrier weighs 70 lbs) Ensure your vehicle’s max payload rating exceeds the weight of your RIG and Carrier and any cargo in your vehicle, including passengers Measure from the center of the receiver pin hole to the furthest rear point on your vehicle (i.e the bumper). This value should be less than 8.0 inches. If you measured more than this, contact us for a longer custom hitch insert. Feel free to contact us with any questions!