ALINX AXRF49: Xilinx Zynq UltraScale+ RFSoC XCZU49DR FPGA Development Board

Features What's Included Resources & Downloads Description AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform AMD Zynq™ UltraScale+™ RFSoC Gen 3: Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz Dual-core Arm Cortex-R5F MPCore up to 533 MHz 16nm FinFET+ Programmable Logic Soft-decision forward error-correction cores (SD-FEC) Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html AXRF49 is a High-End SDR board with XCZU49DR FPGA, equipped with 16×14-bit 2.5GSPS RF-ADCs, 16×14-bit 9.85GSPS RF-DACs, 10GB DDR4, 2x QSFP28, 1x FMC+, GPS, 16T16R RF MCX ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Test and Measurement. Ideal for: 5G and LTE Wireless Remote-PHY for Cable Access DOCSIS 3.1 Phased Array Radar/Digital Array RADAR Test & Measurement Satellite Communications The SOM model is ACRF49. Also check out our AXRF67 with XCZU67DR. FPGA Specification SOM ACRF49 FPGA XCZU49DR-2FFVF1760I 14-bit RF-ADC w/DDC 16x, Max Rate (GSPS) 2.5 14-bit RF-DAC w/DUC 16x, Max Rate (GSPS) 9.85 Number of DDCs per RF-ADC 1 RF input Freq max. GHz 6 Decimation / Interpolation 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Processors 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5F, 533MHz High-Speed Connectivity 4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII General Connectivity 214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters GTY 16x Chip Level Industrial Grade Speed Grade -2 Working Temperature -40℃~85℃ System Logic Cells (K) 930 CLB LUTs (K) 425 Max. Dist. RAM (Mb) 13.0 Total Block RAM (Mb) 38.0 UltraRAM (Mb) 22.5 DSP Slices 4,272 1.8V High-Performance (HP) I/Os 312 3.3V High-Density (HD) I/O 96 Board Features DDR4 PS: 5x 1GB DDR4, total 5GB ECC, 64bit Bus, Data Rate 2400Mbps PL: 5x 1GB DDR4, total 5GB, 72bit Bus, Data Rate 2666Mbps QSPI FLASH 2x 512Mbit, for user data storage eMMC 1x 8GB QSFP28 2x M.2 1x NVME M.2 (PCIEx2), for M.2 SSD storage DisplayPort 1x mini DisplayPort, support VESA DisplayPort V1.2a USB 3.0 1x USB3.0, (Type-A, HOST, SLAVE), for external USB devices USB JTAG / UART 1x Type-C, UART for serial communication with PC or devices JTAG for Programs Debug and Download GPS 1x NEO-M8N FMC+ 1x FMC+ Ethernet Interface 1x 10/100/1000M Ethernet with RJ45 for data exchange Active Crystal Oscillator 1x Single-ended 33.333MHz provide PS Clock 1x LMK04828 for the PL Logic, DDR Reference, GTY Expansion Port PL I/O: 1x 7-pin, 1x 8-pin ; PS I/O: 1x 8-pin MMCX ports 9x mmcx: CLK IN/OUT, SYSREF IN, TRIG IN/OUT, ADC/DAC CLK EEPROM 1x AT24CM01 with IIC SD Card Slot 1 micro SD Card Slot, support SD Mode and SPI Mode Real Time Clock 1x Built-in RTC LEDs SOM: Carrier: 4x User Push-Buttons 1x Reset Power Supply Voltage Input: +12 V DC, PCIE 6-pin Current Input: Max. Current 8.5 A What's Included FPGA Board 1 DC Fan (installed) 1 USB to Type-C cable 1 12V Power Adapter 1 set SMA Cable 8x MCX to SMA Cable 16x MMCX to SMA Cable 4x Ethernet Cable 1x SD Card 1x 32GB SD Card Reader 1 Dimensions Dimension 277.48 mm x 180.34 mm (Carrier Board) 120.00 mm x 95.00 mm (SOM) PCB Independent GND and Power Layers Resources & Downloads AXRF49 User Manual (PDF) Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.