Porcelain – Anthracite – Outdoor Kitchen Worktop – Custom Size (Rectangular)

Portland Night Porcelain Outdoor Kitchen Worktop – Custom Size (Rectangular) This product allows you to order a custom-sized porcelain outdoor kitchen worktop in the Portland Night finish, cut to your required rectangular dimensions. It is ideal for projects where a simple, straight-edged worktop is needed without additional fabrication. This is a basic customisation service and includes straight cuts only. It is suitable for standard square or rectangular shapes where the slab simply needs reducing to size. No cut-outs, internal corners, angles, curves or complex shapes can be produced using this product. If your project requires sink cut-outs, hob openings or non-rectangular designs, please order the Portland Night Kitchen Worktop – Full Customisation (Holes, Sinks & Shapes) product instead. Manufactured from high-quality 20 mm outdoor porcelain, the Portland Night finish features a deep anthracite grey tone that delivers a bold, contemporary look. It pairs particularly well with modern outdoor kitchens, contrasting cabinetry and darker design schemes. The vitrified porcelain body provides excellent durability, making it highly resistant to staining, moisture, frost and outdoor weather conditions, ensuring long-lasting performance with minimal maintenance. Pricing structure: Prices are based on per piece. Each piece can be cut up to a maximum size of approximately 1800 mm × 795 mm. If your required size exceeds this, multiple pieces must be ordered. For example: 2400 mm × 600 mm = 2 pieces required 4000 mm × 700 mm = 4 pieces required Main Benefits ✓ Custom cut to your required rectangular size ✓ Ideal for simple, straight-edged layouts ✓ More cost-effective than full bespoke fabrication ✓ Contemporary anthracite porcelain finish ✓ Resistant to stains, frost and outdoor conditions ✓ Low maintenance and easy to clean Important Information Basic customisation only: Straight cuts forming square or rectangular shapes only. No cut-outs or complex fabrication: This product does not include sink, hob or service cut-outs. Maximum size: The largest single-piece worktop available is approximately 1800 mm × 800 mm. Cut edges: Once cut, the exposed edge may not exactly match the original factory edge finish or colour. For advanced requirements: Please select the full customisation product for any complex designs or additional fabrication. Product Details • Material: Outdoor porcelain (vitrified body) • Colour: Portland Night – anthracite • Finish: Matt surface • Thickness: 20 mm • Customisation: Straight cuts only (rectangular shapes) • Use: Outdoor kitchen worktops Please note: This product is intended for simple size adjustments only. Any requirements beyond straight rectangular cuts must be ordered through the full customisation service. ==specification-part== Product Specifications General Material Porcelain / Vitrified Body Surface Finish Matt porcelain surface Edge Type Cut edges (not factory finished) Thickness 20 mm Shade Variation V2 – Moderate variation Dimensions Size Custom size (max 1800 mm × 800 mm) Supply Cut to size from full slab Performance Water Absorption < 0.5% Frost Resistant Yes Stain Resistance Typically Class 3 or higher Chemical Resistance Resistant to household chemicals Application Suitable For Outdoor kitchen worktops Maintenance Low maintenance, easy to clean Once a porcelain slab is cut, the exposed edge may not exactly match the factory edge in colour or finish. Minor variation in edge tone and shade can occur and may vary slightly between production batches.