Dawn HEX Titanium 18350 Flashlight Kit - Reylight - Final Run ( 3 Variants )

Coming Soon - Jump On The Waitlist Now To Be Notified! ( Raw, Beadblast & Stonewash Finish Variants ) 519A Nichia - 4000K Color Includes A 18350 Lithium Battery & 1A Quick Charger Too! The Reylight Triple-LED Custom Flashlight A pocket-sized powerhouse designed for ultimate versatility, the Reylight features a premium triple-Nichia 219B LED setup paired with a Carclo TIR optic. This combination delivers up to 2,000 lumens of beautifully tinted, ultra-wide flood light—perfect for short-range and up-close illumination. Compact & Modular Design - Pocket to Full-Sized: Ships in an ultra-compact 18350 configuration (82 mm / 3.23 in, 154g / 5.43 oz with battery). - Tough & Lightweight: Precision machined with a 25 mm / 0.98 in head diameter and a lightweight 128g (4.51 oz) bare weight. - Zero-Drain Lockout: Features a true mechanical tail switch that consumes zero standby energy, making physical lockouts unnecessary. Performance & Power Max Output: Blasts up to 2,000 lumens on Turbo using high-drain cells, gracefully tapering down after a 60-second safety timer to manage heat. Low-Voltage Protection: Built-in safety driver automatically shuts the light off at 2.9V to protect your batteries. Current Draw (Measured at Tail): Moon (0.08A) | Low (0.19A) | Medium (1.0A) | Turbo (4.6A). Dual-Layer User Interface The mechanical switch uses simple clicks for power and intuitive half-clicks to navigate modes. Includes Mode Memory(saves your last mode after 1 second of use) and zero noticeable PWM flicker. Triple Nichia 519a-4000K LED Group1: (Moonlight)-2%-20%-100% ( Default) Group2: (ML)-10%-40%-100% Group3: (ML)-2%-10%-50% Group4: (ML)-50%-100%-strobe-SOS Programming guide ToEnter Configuration Mode: -From ON, half-click/tap the tail switch 8+ times until it starts to flash. (When the configuration mode is entered, the light will start to blink once, then a quick flash, blink twice, then a quick flash, blink three times, then a quick flash, blink four times, then a quick flash, blink five times, then a quick flash. This sequence continues twice if a selection is not chosen) *The number of blinks indicates the configuration option number to be changed. * Half-click/tap the tail switch during any quick flashes following the blinks to select the configuration option. -Here are the configuration options: Mode group selection (After entering this menu, you can see it blink 4 times. The number of blinks indicates the number of mode groups) The 1st blink --------- Group1: (Moonlight)-2%-20%-100% The 2nd blink -------- Group2: (Moonlight)-10%-40%-100% The 3rd blink -------- Group3: (Moonlight)-2%-10%-50% The 4th blink -------- Group4: (Moonlight)-50%-100%-strobe-SOS *Half-click/tap the tail switch during any blinks to select the mode group. *After selecting the mode group, you can half-click/tap to select the brightness mode. Memory mode on-off toggle (default off) To turn memory mode on, half-click/tap the tail switch during the quick flash after the second blink. *To turn off the memory mode, reenter the configuration mode and repeat the instruction above. Moonlight mode off-on toggle (default on) To turn the moonlight off, half-click/tap the tail switch during the quick flash after the third blink. *Repeat to turn the moonlight on. Mode order toggle (default LMH) To change the mode order from Low Medium High to High Medium Low, half-click/tap the tail switch during the quick flash after the fourth blink. *Repeat to reverse the order. For example, the default mode order of group 1 is (Moonlight)-2%-20%-100%, if you change the mode group to HML, the mode ORDER of group 1 will be (Moonlight)-100%-20%-2% Factory reset Half-click/tap the tail switch during the quick flash after the fifth blink to reset all options to their original states. Please check the programming demo 1 and demo 2.