Revival - ATALANTE Grande Réserve - 3-Way Loudspeakers

Revival Audio ATALANTE Grande Réserve 3-Way Loudspeakers Limited-Edition Reference 3-Way Loudspeaker The Revival Audio ATALANTE Grande Réserve is the most exclusive expression of the ATALANTE loudspeaker series, created in a strictly limited production run of 300 pairs worldwide. Building on the performance of the ATALANTE 7 Évo, the Grande Réserve combines Revival Audio’s next-generation RASC™ Évo tweeter and midrange, a specially developed 12-inch BSC™ Grande Réserve woofer, StrataBaffle™ multi-layer front baffle and premium crossover components from Mundorf, WBT and van den Hul. Designed for listeners seeking reference-level performance in refined proportions, the ATALANTE Grande Réserve delivers deep, articulate bass, exceptional detail retrieval and a natural, expansive musical presentation. Highlights & Benefits Limited to 300 pairs worldwide — an exclusive flagship loudspeaker from Revival Audio. 3-way loudspeaker design — dedicated tweeter, midrange and bass drivers for optimised performance across the frequency spectrum. 28mm RASC™ Évo soft-dome tweeter — enhanced resonance control for clear, natural high frequencies. 75mm RASC™ Évo soft-dome midrange — engineered for transparency, tonal purity and expressive vocals. 300mm BSC™ Grande Réserve woofer — re-engineered 12-inch basalt sandwich driver for deep, controlled bass. 26Hz–24kHz frequency response — wide bandwidth for full-range music reproduction. 89dB sensitivity — designed to work with a broad range of high-quality amplifiers. StrataBaffle™ construction — multi-layer front baffle engineered for greater rigidity and lower resonance. Mundorf crossover components — premium components throughout the signal path. WBT binding posts — high-quality connections mounted to an individually numbered aluminium terminal plate. van den Hul Skyline internal wiring — premium internal signal cabling. AeroVex™ dual rear bass ports — engineered for smoother airflow and reduced port noise. Dedicated wood stands included — purpose-built stands with isolation and adjustment features. Smoked Oak finish — premium veneer created specifically for the Grande Réserve. RASC™ Évo Tweeter The ATALANTE Grande Réserve introduces Revival Audio’s next-generation 28mm RASC™ Évo soft-dome tweeter. Its enhanced patented ARID anti-resonance technology is designed to absorb more than 97% of internal resonance, helping reduce unwanted distortion and preserve clarity at high frequencies. A neodymium magnet system, specially developed Tetoron dome, pure aluminium voice coil and aluminium rear chamber work together to provide extended, controlled treble without excessive harshness or fatigue. RASC™ Évo Midrange A dedicated 75mm RASC™ Évo soft-dome midrange driver handles the critical vocal and instrumental frequencies. Its enhanced ARID+ technology is designed to absorb more than 96% of internal resonance, while a neodymium motor system, double-suspension dome and aluminium back chamber help maintain linear movement and reduce unwanted reflections. Copper-clad aluminium wiring and a shorting ring further help reduce distortion and improve transient response. 12-Inch BSC™ Grande Réserve Woofer Low frequencies are handled by a specially re-engineered 300mm (12-inch) BSC™ Grande Réserve woofer. The driver uses Revival Audio’s Basalt Sandwich Construction, made using basalt derived from lava stone to provide a combination of rigidity, low mass and controlled damping. Compared with the earlier ATALANTE 5 woofer architecture, the Grande Réserve version incorporates increased excursion capability, an oversized 2.25-inch voice coil, an upgraded magnet structure and a four-layer voice coil design. The result is greater low-frequency extension, control and dynamic capability while maintaining accurate transient response. StrataBaffle™ Multi-Layer Front Baffle The Grande Réserve introduces Revival Audio’s StrataBaffle™, a specialised multi-layer front baffle engineered exclusively for this model. Its construction combines: 25mm solid oak outer layer weighing approximately 6kg Ultra-Density Fibreboard core Engineered structural backing Acoustically chamfered edges The layered architecture increases rigidity and controls cabinet resonance, while the chamfered edges help reduce diffraction around the drivers. Premium Grande Réserve Crossover The ATALANTE Grande Réserve crossover uses carefully selected premium components to maintain signal purity and integrate the three drivers. Key components include: Mundorf Supreme capacitors and resistors WBT binding posts Custom Revival Audio capacitors and inductors Supreme air coils van den Hul Skyline internal wiring All-pass filter topology Each crossover is hand-tuned to optimise acoustic phase coherence and integration between the tweeter, midrange and woofer. AeroVex™ Dual Rear Bass Ports The Grande Réserve incorporates Revival Audio’s latest AeroVex™ dual rear bass-port system. Developed through extensive simulation, its wave-guided internal pattern is designed to minimise turbulence and reduce port noise by more than 94%. The dual-port configuration helps extend low-frequency response while retaining control and clarity at higher playback levels. Resonance-Optimised Cabinet The cabinet has been extensively re-engineered through simulation and testing to provide a rigid, controlled foundation for the loudspeaker drivers. Its construction works together with the StrataBaffle front panel and internal architecture to minimise unwanted cabinet vibration and resonance. The individually numbered aluminium rear terminal plate provides a visual reminder of the Grande Réserve’s limited 300-pair worldwide production run. Dedicated Wood Stands Included Each pair of ATALANTE Grande Réserve loudspeakers includes Revival Audio’s dedicated wood stands. The stands combine oak construction with die-cast reinforcement and incorporate: Decoupling spikes between speaker and stand Micro-adjustable isolation spikes Premium isolation pads Laser-engraved baseplates Chamfered edges matching the loudspeaker cabinet The dedicated stands are included in the standard package and bring the complete loudspeaker height to 1176mm. Smoked Oak Finish The ATALANTE Grande Réserve is presented in an exclusive Smoked Oak finish, combining premium veneer with the classic proportions and design language of Revival Audio’s ATALANTE series. Together with its sculpted StrataBaffle and matching dedicated stands, the finish gives the Grande Réserve a distinctive appearance suited to premium listening spaces. Why Choose the Revival Audio ATALANTE Grande Réserve? The Revival Audio ATALANTE Grande Réserve is designed for listeners seeking the highest expression of the ATALANTE range. With only 300 pairs produced worldwide, it combines reference-level driver technology, premium crossover components, specialised cabinet construction and dedicated matching stands in a highly exclusive loudspeaker system. Its 12-inch BSC™ woofer, RASC™ Évo midrange and tweeter, 26Hz low-frequency extension and premium component selection make it suited to high-end stereo systems where musical scale, detail and natural tonal balance are priorities. Specifications Technical Specifications Specification Details Type 3-Way Loudspeaker Frequency Response 26Hz–24kHz (-6dB) Sensitivity 89dB / 2.83V / 1 metre Nominal Impedance 4Ω Minimum Impedance 3.2Ω at 110Hz Crossover Frequencies 400Hz / 2.0kHz Power Handling 200W Recommended Amplifier Power Starting from 30–50W Recommended Room Size 30–65m² / 323–700ft² Production Limited to 300 pairs worldwide Drive Units Driver Specification Tweeter 1 × 28mm / 1⅛" RASC™ Évo Soft-Dome Tweeter Midrange 1 × 75mm / 3" RASC™ Évo Soft-Dome Midrange Woofer 1 × 300mm / 12" BSC™ Grande Réserve Woofer Tweeter Technology Specification Details Driver 28mm RASC™ Évo Diaphragm Specially Made Tetoron Soft Dome Resonance Control Patented ARID Technology Internal Resonance Absorption 97%+ Magnet Neodymium Voice Coil Pure Aluminium Back Chamber Aluminium Back Plate Ventilated with Diffuser Midrange Technology Specification Details Driver 75mm RASC™ Évo Resonance Control Patented ARID+ Technology Internal Resonance Absorption 96%+ Magnet Neodymium Suspension Double Suspension Dome Back Chamber Aluminium Resonance Control Tri-Zone Voice Coil Wire Copper-Clad Aluminium Motor Control Shorting Ring Back Plate Ventilated with Diffuser Woofer Technology Specification Details Driver Diameter 300mm / 12 inches Cone Technology BSC™ Basalt Sandwich Construction Linear Excursion Extended 10mm One-Way X-Max ±12mm Voice Coil 2.25 inches Voice Coil Construction 4-Layer Voice Coil Former Black Aluminium Bobbin Magnet Stack 36mm Bass Loading AeroVex™ Dual Rear Ports Cabinet & Construction Specification Details Front Baffle StrataBaffle™ Multi-Layer Construction Outer Baffle Layer 25mm Oak Outer Baffle Weight Approx. 6kg Core Material Ultra-Density Fibreboard – UDF Edge Design Acoustic Chamfered Edges Cabinet Resonance-Optimised Construction Finish Smoked Oak Terminal Plate Individually Numbered Aluminium Binding Posts WBT Crossover Specification Details Components Mundorf Supreme Binding Posts WBT Internal Wiring van den Hul Skyline Filter Design All-Pass Filter Topology Tuning Hand-Tuned Additional Components Custom Revival Audio Capacitors & Inductors / Supreme Air Coils Dimensions & Weight Specification Details Dimensions With Stand – H × W × D 1176 × 420 × 355mm Dimensions Without Stand – H × W × D 710 × 420 × 355mm Weight With Stand 46.1kg each Weight Without Stand 35.5kg each Included Stand Specification Details Stand Dedicated Grande Réserve Wood Stand Included Yes – included in standard package Construction Oak Wood with Die-Cast Reinforcement Speaker Isolation Decoupling Spikes Floor Isolation Micro-Adjustable Spikes & Isolation Pads Baseplate Laser Engraved