Copper Beech CBF-2525 Commercial Split Pot Gas Tube Fryer, 120,000 BTU

Copper Beech CBF-2525Q Split Pot Gas Tube Fryer MODEL: CBF-2525Q DESCRIPTION: SPLIT POT GAS TUBE FRYER TOTAL BTU/HR: 120,000 PACKING SIZE (IN): 18" x 33" x 34" N/W (LB): 157 G/W (LB): 181 FEATURES Stainless steel front with galvanized sides Vertical burner (30,000 BTU/HR each) cast iron Thermostatically controlled (200°F - 400°F) Open S/S fryer pot with cold zone Standby S/S pilot for easy start Casters included Milli-volt control valve Prompt response thermostat ensures fast temp recovery High-limit for safety (450°F) 1-1/4" full port drain valve S/S heat exchanger with baffle for high efficiency S/S hanger plate at the back Two baskets included 3/4" NPT rear gas connection Gas type should be specified when confirming order 3-year parts warranty Installation Instructions A gas pressure regulator supplied with the unit must be installed: Natural Gas 4.0" (102 mm) W.C. / Propane Gas 10.0" (254 mm) W.C. An adequate ventilation system is required for commercial cooking equipment. These units are manufactured for installation in accordance with National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition). This appliance is intended for commercial installation only and is not intended for home use. Equipment clearance requirement: Sides: Non-combustibles 0" | Combustibles 4" Back: Non-combustibles 0" | Combustibles 4" All the installation must be performed by qualified technicians.