Wifi Sequencer LED rear bumper reflectors for Cadillac Escalade 25 26 27

WiFi Sequential LED Rear Bumper Reflectors - PRE-ORDER For 2025–2027 Cadillac Escalade / Escalade ESV Sold as a pair — driver side and passenger side Vehicle Fitment 2025 Cadillac Escalade 2026 Cadillac Escalade 2027 Cadillac Escalade 2025 Cadillac Escalade ESV 2026 Cadillac Escalade ESV 2027 Cadillac Escalade ESV Please compare your factory rear bumper reflector shape with the product photos before ordering. If you are not sure about fitment, contact us at contact@corsomotion.com before purchasing. This product is not intended for Cadillac Escalade IQ unless specifically confirmed by Corsomotion. Product Overview Upgrade the rear-end appearance of your 2025–2027 Cadillac Escalade or Escalade ESV with Corsomotion WiFi Sequential LED Rear Bumper Reflectors. These custom-made LED reflectors are designed to install in the rear bumper reflector location and add a clean, modern lighting effect with programmable animation control. The system supports parking light, brake light, and turn signal functions through the included LED control module. Unlike generic LED add-ons or mass-produced universal parts, this system is developed as a vehicle-specific custom lighting upgrade. The LED boards, control module, circuit design, firmware behavior, and final assembly are handled in-house by Corsomotion in Baldwin Park, California. The reflector lens remains part of the assembly, helping retain the original passive reflective function while adding active LED illumination. This allows the vehicle to keep a clean OEM-style rear bumper appearance while gaining a custom LED lighting upgrade. Designed, built, programmed, and tested in Los Angeles, California. Custom made to order and tested before shipment. Key Features 01. WiFi Pattern Control Adjust lighting patterns and animation speed from your smartphone through the included WiFi LED control module. No separate app is required. 02. Sequential LED Animation Select from pre-programmed sequential lighting animations for a clean, modern rear lighting effect. 03. Parking / Brake / Turn Signal Functions Supports multiple rear lighting functions when properly wired to the vehicle lighting system, including selectable startup, brake, and turn signal animation behavior. 04. Corsomotion-Spec LED Boards & Control Electronics This is not a generic mass-production LED strip or low-cost universal lighting kit. Each system is built as a dedicated custom LED assembly using Corsomotion-spec components selected for quality, brightness consistency, and reliable operation. From control module circuit design and firmware development to LED board manufacturing and final assembly, the core system is produced in-house at our Baldwin Park, California warehouse. We build in small batches with a quality-first approach for custom automotive lighting applications. 05. Clean OEM-Style Appearance with Reflector Function Retained Designed to maintain a clean rear bumper appearance while adding a custom LED lighting upgrade. The original reflector-style lens remains part of the assembly, helping preserve the passive reflective function while adding active LED output for a more distinctive rear lighting presence. Lighting Functions Parking Light Selectable startup animation for the parking light function. Brake Light Selectable brake light animations for brake activation, brake hold, and brake release behavior. Turn Signal Choose from pre-programmed turn signal animations designed for a modern sequential lighting effect. WiFi Control Adjust the desired animation pattern and speed at any time using the included WiFi LED control module. Note: Lighting appearance may vary depending on camera exposure, lens color, selected pattern, and vehicle-specific installation. Installation Professional installation is recommended. This product requires wiring into the vehicle’s rear lighting system. If you are not familiar with automotive electrical work, we strongly recommend having the installation performed by a qualified installer. Installation level: Intermediate Recommended installer: Professional automotive lighting installer or experienced DIY installer Electrical work required: Yes Important Wiring Notice The LED reflectors must be connected to the included Corsomotion LED control module. Do not connect the LED reflectors directly to 12V vehicle power. The LED reflector wires are: 5V+ Data IN GND These wires must connect to the output side of the included LED control module. Connecting the LED boards directly to 12V vehicle power will immediately damage the LEDs and is not covered under warranty. What’s Included Left and right LED rear bumper reflectors WiFi LED control module Wiring leads Basic setup instructions Build Time & Shipping Custom made to order Typical lead time: 3–10 business days before shipment Built and shipped from Baldwin Park, California Tracking information will be provided once your order ships Since each set is custom built and tested before shipment, processing time may vary depending on current order volume and parts availability. Warranty & Support Includes a 1-year limited warranty against manufacturing defects. Damage caused by incorrect wiring, direct 12V connection to the LED boards, improper installation, water intrusion caused by modification, or physical damage is not covered under warranty. For support or fitment questions, contact us at: contact@corsomotion.com Disclaimer Aftermarket lighting regulations vary by state and location. Please check your local regulations before using aftermarket lighting products on public roads. Corsomotion is not affiliated with, endorsed by, or sponsored by Cadillac, Escalade, or General Motors. Vehicle names are used only to identify product compatibility.