LIFT LCS FOLDING POWER PROPELLER

A 1.8 inch blade with 6.3 inches of pitch. More thrust at takeoff, more speed under power. For riders who foil off power. The LCS Folding Power Propeller is built on Lift's 2026 folding propeller redesign, a reshaped collapse and reinforcement at the highest-stress points. On that foundation, the Power runs its own blade geometry, sized and pitched for thrust and speed. Blades measure 1.8 inches at the widest section, the most blade in the folding line, with 6.3 inches of pitch on a 6 inch diameter. The wider blade drives the takeoff, and the higher pitch carries speed under power. It ships propeller-only for 55mm propulsions, or as a kit with the LCS Base Plate and LCS Tail Cone for any 68mm motor. Construction is aluminum with stainless steel inserts. FEATURES: • 1.8 Inch Blades, More Thrust at Takeoff and Speed Under Power. The Power carries 1.8 inch blades with 6.3 inches of pitch across a 6 inch diameter. More blade surface drives the takeoff from the first second of throttle, and the higher pitch carries more speed once the board is flying. • A Reshaped Collapse, Flatter Fold and Cleaner Off Power. When the motor cuts, the blades fold flat against the hub. The 2026 redesign reshaped the folded position for cleaner hydrodynamics, with no twitch as the blades settle and no torque grab when the throttle re-engages mid-ride. • Reinforced Design, Stronger Where Folding Propellers Take Load Reinforced at the highest-stress points of the design, machined from aluminum with stainless steel inserts. Lift has refined this part through five generations since 2020, each one built on the engineering decisions of the last. • Native LCS Construction, Tool-Free Installation Across Every Lift eFoil. The Power mounts through the Lift Connect System, directly onto the shaft of any 55mm propulsion, or onto a 68mm motor with the LCS Base Plate and LCS Tail Cone, both included in the kit. Swaps are tool-free, so the propeller becomes a configuration choice, matched to the day, the board, and the rider. SPECS Product Material(s) Aluminum w/ stainless steel inserts Blade Pitch 6.3” (160 mm) Blade Diameter 6” (152 mm) Blade Width (widest section) 1.8” (46mm) Compatibility 55mm Motor (native) 68mm Motor (with kit) Select your Propulsion size: 55mm: Propeller only (the 55mm propulsion has the LCS interface built in) 68mm: Propeller Kit (includes LCS Folding Glide Propeller, LCS Base Plate, and LCS Tail Cone)